Check Tic-coated Tungsten Carbide Tool Wear in Machining Steel

Cryogenic treatment of tungsten carbide reduces tool wear when machining medium density fiberboard

igh-temperature corrosion/oxidation has been shown to be a major contributor to the wear of tungsten carbide when machining medium density fiberboard (MDF) (Stewart 1992). Consequently, a change in the properties of the tool material to resist wear from the adverse wood machining environment needs to be investigated. A deep cryogenic treatment shows promise as a tool material treatment for incr...

Modeling of Tool Wear in Turning EN 31 Alloy Steel using Coated Carbide Inserts

The experimental investigations of the tool wear in turning of EN 31 alloy steel at different cutting parameters are reported in this paper. Mathematical model has been developed for flank wear using response surface methodology. This mathematical model correlates independent cutting parameters viz. cutting speed, feed rate and depth of cut with dependent parameters of flank wear. This model is...

Experimental Analysis of Cryogenic Treatment on Coated Tungsten Carbide Inserts in Turning

This research work presents the results of an experimental investigation of cryogenically treated, coated and uncoated tungsten carbide cutting tool inserts in turning of AISI 1040 steel. Three different tungsten carbide inserts coated with aluminum chromium nitride (AlCrN), titanium nitride (TiN) and uncoated WC were taken and treated cryogenically. Experiments were performed to evaluate the c...

An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish

High-speed machining (HSM) has emerged as a key technology in rapid tooling and manufacturing applications. Compared with traditional machining, the cutting speed, feed rate has been great progress, and the cutting mechanism is not the same. HSM with coated carbide cutting tools used in high-speed, high temperature situations and cutting more efficient and provided a lower surface roughness. Ho...

Machining Characteristics of Direct Laser Deposited Tungsten Carbide

Wear and tool life of tungsten carbide, PCBN and PCD cutting tools

The wear mechanisms of cutting tools made of tungsten-carbide (WC), PCBN and PCD were investigated using the tool life and temperature results available in the literature. For tool/work combinations WC/steel and PCBN/hardened-steel, under practical conditions, tool wear was found to be greatly influenced by the temperature. It was concluded that the most likely dominant tool wear mechanism for ...