Effect of Different Additives on Separation Performance of Flat Sheet PVDF Membrane Contactor

نویسندگان

  • Ali Ghadimi Department of Petrochemicals Synthesis, Iran Polymer and Petrochemical Institute, Tehran, Iran
  • Azadeh Ghaee Department of life science engineering, Faculty of new sciences and technologies, University of Tehran, Tehran, Iran
  • Behrouz Sadatnia Department of Biomaterials, Iran Polymer and Petrochemical Institute, Tehran, Iran
  • Mohammad Khosravi School of Chemical Engineering, College of Engineering, University of Tehran, Tehran, Iran
  • Zahra Mansourpour School of Chemical Engineering, College of Engineering, University of Tehran, Tehran, Iran
چکیده مقاله:

This paper investigates effects of different additives on morphology and subsequently, separation performance of asymmetric flat sheet Polyvinylidene fluoride (PVDF) membranes to separate CO2 using membrane contractor. Five different additives from different chemical families including Lithium chloride (salt), Polyethylene glycol 400 (polymer), glycerol (weak anti-solvents), methanol (alcohols) and acetic acid (weak secondary solvents) were used for controlling the morphology of the fabricated membranes. The fabricated PVDF membranes were applied to separate CO2 from a gas mixture of (20/80 wt/wt) CO2/N2 by contacting with (20/80 wt/wt) Monoethanolamine/H2O as absorbent. The investigations revealed that among the all considered additives, glycerol has the most promising effect on the performance of CO2 separation from the feed gas mixture. Effects of operational parameters such as flow rate and temperature of absorbents on the separation performance were also studied. Investigations showed that the lowest level of temperature (30 ºC) and the highest level of the flow rate of absorbent (500 ) provide better separation performance. Additionally, the presence of glycerol increased absorption performance (η) from 0.63 to 0.78 (at the lowest level of flow rate) and from 0.79 to 0.91 (at the highest level of flow rate) compared to the bare PVDF membranes.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling and Experimental Study of Carbon Dioxide Absorption in a Flat Sheet Membrane Contactor

comIn the present study, CO2 removal from natural gas stream has been studied using a flat sheet membrane contactor. A three dimensional mathematical model is developed to describe the process. The model considers the transport of a gas mixture containing carbon dioxide and methane through a flat sheet membrane contactor module. The model is based on the non-wetted mode of operation, in which t...

متن کامل

effect of oral presentation on development of l2 learners grammar

this experimental study has been conducted to test the effect of oral presentation on the development of l2 learners grammar. but this oral presentation is not merely a deductive instruction of grammatical points, in this presentation two hypotheses of krashen (input and low filter hypotheses), stevicks viewpoints on grammar explanation and correction and widdowsons opinion on limited use of l1...

15 صفحه اول

the effect of task cognitive complexity and time limit on the performance of the learners with different proficiency levels in second language writing skill

this study investigated the effects of manipulating the cognitive complexity of tasks along +/- few elements and the time limits on l2 learners writing performance. to conduct the study, 60 iranian efl learners with two levels of proficiency, low and high intermediate, were selected and assigned to three groups based on the time devoted to task completion. the participants performed both a simp...

15 صفحه اول

Mathematical Modeling of Gas Separation in Flat-sheet Membrane Contactors

Gas-liquid membrane contactors offer several practical advantages including high surface area per unit volume; independent control of gas and liquid velocities without any flooding, loading, weeping, or foaming, pre-determined gas–liquid interfacial area, membrane modules, capability of linear scale-up; low corrosion problems, and low operation and capital costs. Two common types of membrane co...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 52  شماره 2

صفحات  157- 167

تاریخ انتشار 2018-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023