Iron leaching from bauxite ore in hydrochloric acid using response surface methodology

نویسندگان

  • A. Amini Head of Mineral Processing Division, Geology & Exploration Organization of Iran, Tehran, Iran.
  • A. Heidarnia School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran.
  • M. Noaparast School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran
  • S.Z. Shafaei School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran.
  • soghra salehi Department of Mining Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
چکیده مقاله:

In this work, hydrochloric acid is used to remove iron impurities in the bauxite ore contained in the diasporite mineral located in the Sari region. The bauxite ore was calcined at different temperatures and times, and then dissolved in a hydrochloric acid solution. After determining the optimum calcination conditions in 1 h at 900 °C, the response surface methodology (RSM) with four factors in five levels was employed in order to evaluate the effects of calcination temperature, calcination time, acid concentration, and leaching time on the iron leaching efficiency. A quadratic model is proposed using this methodology to correlate the leaching variables. The test results indicate that the model is consistent with the experimental data, and that the most important varriables involved are the acid concentration, leaching time, and squared term of calcination temperature (A2). The maximum iron recovery was 94.97%, and the Fe grade in the solids remained was 2.35% at the calcination temperature of 900 °C, a calcination time of 1 hour, and a leaching time of 2 h in hydrochloric acid (6 mM).

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

iron leaching from bauxite ore in hydrochloric acid using response surface methodology

in this work, hydrochloric acid is used to remove iron impurities in the bauxite ore contained in the diasporite mineral located in the sari region. the bauxite ore was calcined at different temperatures and times, and then dissolved in a hydrochloric acid solution. after determining the optimum calcination conditions in 1 h at 900 °c, the response surface methodology (rsm) with four factors in...

متن کامل

Quantitative Leaching of a Nigerian Iron Ore in Hydrochloric Acid

A study on the quantitative leaching of iron ore in hydrochloric acid solution has been undertaken. The elemental composition of the iron ore was also carried out using ICP-MS technique. The major elements in the iron ore include: Fe(66.7%); Al (0.2%); Si (5.2%); Ti (0.02%) and O (28.0%). Some traces of V, Ni, Zn, Ce, Cr, La, Y and Zr were also found. The effects of contact time, acid concentra...

متن کامل

Vanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology

In this work, thealkaline roasting and sulfuric acid leaching processes were employed to extract vanadium from the magnetite ore of Saghand mine in central Iran. The response surface methodology based on the central composite design model was applied to optimize the parameters involved in the processes. The studied roasting parameters were temperature (900-1100 °C), sodium carbonate percentage ...

متن کامل

Reduction of Sulphur Content of AGBAJA Iron Ore using Hydrochloric Acid (HCL)

Iron ores are used in blast furnace for the production of pig iron; AGBAJA Iron ore has an estimated reserve of over I billion metric tonnes. Unfortunately, this large reserve cannot be utilized for the production of pig iron due to its high sulphur contents. This work studied the reduction of sulphur content of AGBAJA iron ore. Acid leaching methods were used to reduce sulphur contents of the ...

متن کامل

Response Surface Methodology in Spectrophotometric Determination of Formaldehyde Using Ch romotropic Acid

Formaldehyde in small quantities is commonly analyzed by spectrophotometric methods. One of the most-commonly used spectrophotometric techniques for this purpose is based on the reaction with chromotropic acid. Because of its simplicity, sensitivity, selectivity and its low cost, it is still widely used. Investigations for replacing the concentrated sulfuric acid with other acids or using more ...

متن کامل

Sequential soil washing techniques using hydrochloric acid and sodium hydroxide for remediating arsenic-contaminated soils in abandoned iron-ore mines.

Sequential washing techniques using single or dual agents [sodium hydroxide (NaOH) and hydrochloric acid (HCl) solutions] were applied to arsenic-contaminated soils in an abandoned iron-ore mine area. We investigated the best remediation strategies to maximize arsenic removal efficiency for both soils and arsenic-containing washing solution through conducting a series of batch experiments. Base...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 6  شماره 1

صفحات  103- 108

تاریخ انتشار 2015-02-22

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023