Performance evaluation of waste fried vegetable oil in a medium grade low heat rejection diesel engine

نویسندگان

  • M. V. S. Murali Krishna bMechanical Engineering Department, Chaitanya Bharathi Institute of Technology, Gandipet, Hyderabad-500 075, Telengana State, India
  • P. V. K. Murthy Jayapraksh Narayan Group of Institutions , Mahabubnagar-509001, Telengana State, India
  • R. P. Chowdary bMechanical Engineering Department, Chaitanya Bharathi Institute of Technology, Gandipet, Hyderabad-500 075, Telengana State, India
  • T. Kishen Kumar Reddy Mechanical Engineering Department, College of Engineering, J.N.T. University, Hyderabad -500 085, Telengana State, India
چکیده مقاله:

Investigations were carried out to evaluate the performance of direct injection diesel engine with medium grade low heat rejection (LHR) combustion chamber and 3 mm air gap insulated piston, 3 mm air gap insulated liner, and ceramic coated cylinder head [ceramic coating with the thickness of 500 µ was made on the inside portion of the cylinder head].The engine had different operating conditions [normal temperature and pre–heated temperature] of crude waste fried vegetable oil (WFVO) which was collected from restaurants, hotels, etc. with varied injector opening pressure and injection timing. Performance parameters and exhaust emissions were evaluated at various values of brake mean effective pressure of the engine, while combustion parameters were determined at full load operation of the engine using special pressure–crank angle software package. Comparative studies were performed between vegetable oil operation and diesel operation in the engine with both versions of the combustion chamber with varied injection timing and injector opening pressure. Conventional engine (CE) showed deteriorated performance, while the engine with medium grade LHR combustion chamber had improved performance with waste fried vegetable oil operation at the recommended injection timing and pressure. Performance of both versions of the combustion chamber improved with advanced injection timing and at higher injector opening pressure compared with CE with pure diesel operation. The optimum injection timing was 32o bTDC (before top dead centre) with conventional engine, while it was 30o bTDC for the engine with LHR combustion chamber and vegetable oil operation. Compared with pure diesel operation in the conventional engine, at manufacturer's recommended injection timing of 27o bTDC, peak brake thermal efficiency increased by 9% at full load operation, brake specific energy consumption decreased by 2%, volumetric efficiency decreased by 13%, smoke levels decreased by 10%, and nitrogen oxide (NOx) levels increased by 44% with waste fried vegetable oil operation in the engine with LHR combustion chamber.  

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

performance evaluation of waste fried vegetable oil in a medium grade low heat rejection diesel engine

investigations were carried out to evaluate the performance of direct injection diesel engine with medium grade low heat rejection (lhr) combustion chamber and 3 mm air gap insulated piston, 3 mm air gap insulated liner, and ceramic coated cylinder head [ceramic coating with the thickness of 500 µ was made on the inside portion of the cylinder head].the engine had different operating conditions...

متن کامل

Performance Evaluation of a High Grade Low Heat Rejection Diesel Engine with Waste Fried Vegetable Oil

Investigations were carried out to evaluate the performance of a high grade low heat rejection (LHR) diesel engine with air gap insulated piston, air gap insulated liner and ceramic coated cylinder head [ceramic coating of thickness 500 microns was done on inside portion of cylinder head] with different operating conditions [normal temperature and pre-heated temperature] of crude waste fried ve...

متن کامل

Performance evaluation of a low heat rejection diesel engine with carbureted ethanol and jatropha oil

Experiments were conducted to evaluate the performance of a low heat rejection (LHR) diesel engine. Performance parameters and emission levels were determined at various magnitudes of brake mean effective pressure. Combustion characteristics of the engine were measured with TDC (top dead centre) encoder, pressure transducer, console and special pressure-crank angle software package at peak load...

متن کامل

Performance Evaluation Of A High Grade Low Heat Rejection Diesel Engine With Crude Pongamia Oil

Experiments were conducted to evaluate the performance of a high grade low heat rejection (LHR) diesel engine with air gap insulated piston, air gap insulated liner and ceramic coated cylinder head [ceramic coating of thickness 500 microns was done on inside portion of cylinder head] with different operating conditions [normal temperature and pre-heated temperature] of crude pongamia oil (CPO) ...

متن کامل

performance evaluation of a low heat rejection diesel engine with carbureted ethanol and jatropha oil

experiments were conducted to evaluate the performance of a low heat rejection (lhr) diesel engine. performance parameters and emission levels were determined at various magnitudes of brake mean effective pressure. combustion characteristics of the engine were measured with tdc (top dead centre) encoder, pressure transducer, console and special pressure-crank angle software package at peak load...

متن کامل

A Comparative Study of the Performance of a Low Heat Rejection Engine with Three Different Levels of Insulation with Waste Fried Vegetable Oil Operation

Investigations are carried out to evaluate the performance of a low heat rejection (LHR) diesel engine consisting of different versions such as ceramic coated cylinder head engine-LHR-1; Air gap insulated piston and air gap insulated linerLHR-2; and Ceramic coated cylinder head, air gap insulated piston and air gap insulated liner –LHR-3 with normal temperature condition of linseed oil with var...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 4  شماره 2

صفحات  101- 102

تاریخ انتشار 2015-03-03

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023