Reducing Retrieval Time in Automated Storage and Retrieval System with a Gravitational Conveyor Based on Multi-Agent Systems

نویسندگان

  • Imén Kouloughli Manufacturing Engineering Laboratory of Tlemcen, University of Tlemcen, Algeria.
  • Pierre Castagna LUNAM University, QLIO Department, University of Nantes 44000, France.
  • Zaki Sari LUNAM University, QLIO Department, University of Nantes 44000, France.
چکیده مقاله:

The main objective of this study is to reduce the retrieval time of a list of products by choosing the best combination of storage and retrieval rules at any time. This is why we start by implementing some storage rules in an Automated Storage/Retrieval System (Automated Storage and Retrieval System: AS/RS) fitted with a gravity conveyor while some of these rules are dedicated to storage and others to retrieval. The system is seen as a Multi-Agent System (MAS) where the produced agents are reactive agents that can interact to achieve a behavior (organizing the store). Our MAS is characterized by a decentralized control, which means that there is no preset plan. The produced agents exchange information such as their color, their distance from the output station, etc. Each product merely applies a set of behavioral rules. The aim is to choose the best product to be retrieved in the shortest possible time. The product-type agents have no cognitive ability, but still perform complex tasks.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Retrieval–travel-time model for free-fall-flow-rack automated storage and retrieval system

Automated storage and retrieval systems (AS/RSs) are material handling systems that are frequently used in manufacturing and distribution centers. The modelling of the retrieval–travel time of an AS/RS (expected product delivery time) is practically important, because it allows us to evaluate and improve the system throughput. The free-fall-flow-rack AS/RS has emerged as a new technology for dr...

متن کامل

A Review on Automated Storage/ Retrieval Systems and Shuttle Based Storage/Retrieval Systems

Automated storage and retrieval systems are warehousing systems that are used for the storage and retrieval of products in both distribution and production environments. Shuttle based storage/retrieval systems are composed of elevators with lifting tables that are attached on a mast, shuttle carriers, buffer positions and the storage racks. It is observed that the shuttle based storage/retrieva...

متن کامل

Multi Shuttle Automated Storage Retrieval Systems

Multi shuttle automated storage retrieval systems have been developed for use in factories and distribution centers since they are more e cient than single shuttle systems due to less empty travel This improved e ciency results in more agile support exible response less waiting time etc for the production system the storage retrieval system serves In this paper we develop analytical models to e...

متن کامل

Multi-mode Intelligent Storage and Retrieval Systems in Automated Warehoue

In this paper, we study the multi-mode intelligent storage and retrieval systems in automated warehouse. Automated warehouse is the important component of modern Logistics. The storage and retrieval efficiency is an important problem in automated warehouse. Robot technology was used in the design of warehouses aiming to improve the efficiency greatly. The RFID technology is first applied to loc...

متن کامل

Multi-objective Optimization of Automated Storage and Retrieval Systems

The multi-objective optimization of automated warehouse is discussed and evaluated in present paper. Since most of researchers in material handling community had performed optimization of decision variables with single objective function only (usually named with minimum travel time, maximum throughput capacity, minimum cost, etc.), the multi-objective optimization (time-costquality) will be pre...

متن کامل

RFID-Based Intelligent Storage and Retrieval Systems in Automated Warehouse

In order to improve the storage/retrieval efficiency of automated warehouse, robot technology was applied into the design of warehouses. Firstly, the RFID system is used to locate the target roughly and to obtain the attributes of the target. Then the vision mounted on the robot is used to recognize and locate the target precisely. Finally, the teaching mode and remote mode are used flexibly to...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 4  شماره 1

صفحات  55- 68

تاریخ انتشار 2018-01-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023