Saint-Venant torsion of non-homogeneous anisotropic bars

نویسندگان

  • John Katsikadelis School of Civil Engineering National Technical University of Athens (NTUA) Zografou Campus Athens 15773 Greece
چکیده مقاله:

The BEM is applied to the solution of the torsion problem of non-homogeneous anisotropic non-circular prismatic bars. The problem is formulated in terms of the warping function. This formulation leads to a second order partial differential equation with variable coefficients, subjected to a generalized Neumann type boundary condition. The problem is solved using the Analog Equation Method (AEM). According to this method, the governing equation is replaced by a Poisson’s equation subjected to a fictitious source under the same boundary condition. The fictitious load is established using the Boundary Element Method (BEM) after expanding it into a finite series of radial basis functions. The method has all the advantages of the pure BEM, since the discretization and integration are limited only on to the boundary. Numerical examples are presented which illustrate the efficiency and accuracy of the method.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

saint-venant torsion of non-homogeneous anisotropic bars

the bem is applied to the solution of the torsion problem of non-homogeneous anisotropic non-circular prismatic bars. the problem is formulated in terms of the warping function. this formulation leads to a second order partial differential equation with variable coefficients, subjected to a generalized neumann type boundary condition. the problem is solved using the analog equation method (aem)...

متن کامل

Crack analysis of an orthotropic circular bars reinforced by a magnetic coating under Saint-Venant torsion

This paper presents an analytical solution for an orthotropic circular cross section bar with a magnetic coating weakened by multiple arbitrary oriented cracks under Saint-Venant torsion by means of the distributed dislocation technique. At first, the solution of the orthotropic bar with a magnetic coating weakened by a Volterra-type screw dislocation is achieved with the aid of the finite Four...

متن کامل

Central-Upwind Scheme for a Non-hydrostatic Saint-Venant System

We develop a second-order central-upwind scheme for the non-hydrostatic version of the Saint-Venant system recently proposed in [M.-O. Bristeau and J. Sainte-Marie, Discrete Contin. Dyn. Syst. Ser. B, 10 (2008), pp. 733–759]. The designed scheme is both well-balanced (capable of exactly preserving the “lake-at-rest” steady state) and positivity preserving. We then use the central-upwind scheme ...

متن کامل

Sobolev Gradient Type Preconditioning for the Saint-venant Model of Elasto-plastic Torsion

In this paper a suitable Laplacian preconditioner is proposed for the numerical solution of the nonlinear elasto-plastic torsion problem. The aim is to determine the tangential stress in cross-sections under a given torsion, for which the physical model is based on the Saint Venant model of torsion and the single curve hypothesis for the connection of strain and stress. The proposed iterative s...

متن کامل

Longitudinal waves in homogeneous anisotropic cylindrical bars immersed in fluid

The propagation of a longitudinal wave in an anisotropic cylindrical bar immersed in water is considered. Energy is leaked into the surrounding fluid in the form of traveling waves, and this leakage determines the amplitude of the signal in the rod. This aspect is important in nondestructive evaluation of composite rods. The governing equation of the longitudinal waves traveling in the rod is o...

متن کامل

Simulation and visualization of the Saint-Venant system using GPUs

We consider three high-resolution schemes for computing shallow-water waves as described by the Saint-Venant system and discuss how to develop highly efficient implementations using graphical processing units (GPUs). The schemes are well-balanced for lake-at-rest problems, handle dry states, and support linear friction models. The first two schemes handle dry states by switching variables in th...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 2  شماره 1

صفحات  42- 53

تاریخ انتشار 2016-08-20

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023