M Shariati
Department of Mechanical Engineering, Faculty of Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
[ 1 ] - Mechanical Characteristics and Failure Mechanism of Nano-Single Crystal Aluminum Based on Molecular Dynamics Simulations: Strain Rate and Temperature Effects
Besides experimental methods, numerical simulations bring benefits and great opportunities to characterize and predict mechanical behaviors of materials especially at nanoscale. In this study, a nano-single crystal aluminum (Al) as a typical face centered cubic (FCC) metal was modeled based on molecular dynamics (MD) method and by applying tensile and compressive strain loadings its mechanical ...
[ 2 ] - Numerical and Experimental Study on Ratcheting Behavior of Plates with Circular Cutouts under Cyclic Axial Loading
In this paper, accumulation of plastic deformation of AISI 1045 steel plates with circular cutouts under cyclic axial loading is studied. Loading was applied under force-control conditions. Experimental tests were performed using a Zwick/Roell servo hydraulic machine. Under force-control loading with nonzero mean force, plastic strain was accumulated in continuous cycles called ratcheting. Nume...
[ 3 ] - Influence of the Vacancies on the Buckling Behavior of a Single–Layered Graphene Nanosheet
Graphene is a new class of two-dimensional carbon nanostructure, which holds great promise for the vast applications in many technological fields. It would be one of the prominent new materials for the next generation nano-electronic devices. In this paper the influence of various vacancy defects on the critical buckling load of a single-layered graphene nanosheet is investigated. The nanosheet...
[ 4 ] - Numerical and Experimental Study of Buckling of Rectangular Steel Plates with a Cutout
Steel plates are used in various structures, such as the structures of the deck and body of ships, bridges, and aerospace industry. In this study, we investigate the buckling and post-buckling behavior of rectangular steel plates having circular cutouts with two boundary conditions: first, clamped supports at upper and lower ends and free supports at other edges; second, clamped supports at upp...
[ 5 ] - A Modified Couple Stress Theory for Postbuckling Analysis of Timoshenko and Reddy-Levinson Single-Walled Carbon Nanobeams
The novelty of this study is presentation of an exact solution for prediction of postbuckling behavior of shear deformable micro- and nano-scale beams based on modified couple stress theory and using principle of minimum potential energy. Timoshenko and Reddy-Levinson beam theories are applied to consider the shear deformation effect and Von Karman nonlinear kinematics is used to describe the n...
[ 6 ] - Semi Analytical Analysis of FGM Thick-Walled Cylindrical Pressure Vessel with Longitudinal Variation of Elastic Modulus under Internal Pressure
In this paper, a numerical analysis of stresses and displacements in FGM thick-walled cylindrical pressure vessel under internal pressure has been presented. The elastic modulus is assumed to be varying along the longitude of the pressure vessel with an exponential function continuously. The Poisson’s ratio is assumed to be constant. Whereas most of the previous studies about FGM thick-walled p...
[ 7 ] - Energy-Based Prediction of Low-Cycle Fatigue Life of CK45 Steel and SS316 Stainless Steel
In this paper, low cycle fatigue life of CK45 steel and SS316 stainless steel under strain-controlled loading are experimentally investigated. In addition, the impact of mean strain and strain amplitude on the fatigue life and cyclic behavior of the materials are studied. Furthermore, it is attempted to predict fatigue life using energy and SWT damage parameters. The experimental results demons...
[ 8 ] - Experimental Study on Amine-Functionalized Carbon Nanotubes’ Effect on the Thermomechanical Properties of CNT/Epoxy Nano-composites
This paper investigated the effect of the amine-functionalized carbon nanotubes (CNTs) on the thermomechanical properties of CNT/epoxy nanocomposites. Mechanical stirring and ultra-sonication were utilized to uniformly disperse CNTs into the epoxy matrix. Non-functionalized and amine-functionalized CNTs with different weight percentages (wt. %) were mixed into the epoxy resin. Using standard te...
[ 9 ] - تعیین ضرایب شدت تنش در صفحات تابعی ارتوتروپیک با روش بدون المان گلرکین
روش‌های تولید مواد تابعی سبب میشود رفتار این مواد غیر ایزوتروپ باشد. در این مقاله از روش بدون المان گلرکین برای مطالعة شکست مواد تابعی ارتوتروپیک استفاده شده است. در این روش محاسبة عددی مشتق میدانهای اصلی و کمکی کرنش به‌سادگی انجام میشود، حال آنکه روش المان محدود و فرم توسعهیافتة آن با مشکلاتی همراه است. به‌علاوه در این مقاله یک انتگرال پایستار جدید برای محاسبة پارامترهای شکست در مواد غیره...
[ 10 ] - Statistical analysis of the parameters influencing the mechanical properties of layered MWCNTs/PVC nanocomposites
In this paper, a new method is proposed for the production of MWCNTs/PVC (multi-walled carbon nanotubes/ polyvinyl chloride) nanocomposites. In this method, a spray is used to produce layers of carbon nanotubes within a PVC matrix. Various parameters influence the production of the nanocomposite and its mechanical properties. These parameters are studied separately and the effect of each of par...
[ 11 ] - Statistical analysis of the parameters influencing the mechanical properties of layered MWCNTs/PVC nanocomposites
In this paper, a new method is proposed for the production of MWCNTs/PVC (multi-walled carbon nanotubes/ polyvinyl chloride) nanocomposites. In this method, a spray is used to produce layers of carbon nanotubes within a PVC matrix. Various parameters influence the production of the nanocomposite and its mechanical properties. These parameters are studied separately and the effect of each of par...
[ 12 ] - Dynamic Characteristics of Functionalized Carbon Nanotube Reinforced Epoxy Composites: An Experimental Approach
The effects of amine functionalization of carbon nanotubes (CNTs) and CNTs weight percent (wt. %), on the first bending natural frequencies and damping properties of CNT/epoxy composites are investigated in this paper. CNTs and amine functionalized CNTs (AFCNTs), with two different weight percentages, are used to manufacture the beam shaped specimens. Epoxy, CNT/epoxy (0.25 and 0.5 wt. % of CNT...
نویسندگان همکار