In this study, non-linear behavior of diagonally stiffened steel plate shear walls as a seismic resisting system has been investigated, and theoretical formulas for estimating shear strength capacity of the system have been proposed. Several validated analytical finite element models of steel shear walls with various stiffener dimensions are generated to verify and compare the analytical and th...

The main purpose of the present work is to investigate the impact of soil-structure interaction on performance-based design optimization of steel moment resisting frame (MRF) structures. To this end, the seismic performance of optimally designed MRFs with rigid supports is compared with that of the optimal designs with a flexible base in the context of performance-based design. Two efficient me...

In this study, the performance of triangular added damping and stiffness (TADAS) dampers combined with curved dampers (Curved-TADAS damper) is evaluated in moment resisting steel frame (MRSF). These dampers are passive and install in the beam-column connection region. Variable parameters of this study involve the width of curved damper (50, 75 and 100 mm), the thickness of TADAS damper (5 and 1...

the present study assesses the seismic performance of steel moment resisting frames (smfs) retrofitted with different bracing systems. two structural configurations were utilized: ordinary concentrically braces (ocbfs), buckling-restrained braces (brbfs). a 7-story and 18-story steel perimeter smfs were designed with insufficient lateral stiffness to satisfy code drift limitations in high seism...

endurance time (et) method is a relatively new performance-based earthquake method for structural evaluation and design. in this method, the structure is subjected to a gradually intensifying accelorogram(s) and its performance is assessed based on the maximum time duration that it can meet the specified performance objectives. using moment-resisting and braced frames which are rehabilitated by...

Unreinforced masonry (URM) walls comprise vertical piers and horizontal spandrels, which together form the lateral load resisting system. Whereas past research yielded significant advances in the understanding of the force–deformation characteristics of masonry piers, knowledge of the behaviour of masonry spandrels is lacking. This paper makes a contribution to our understanding of the seismic ...

In moment resisting reinforced concrete framed buildings, corner joints are found at the roof level. These joints, if designed for gravity loads and are based on pre-seismic codes, may suffer substantial damage during earthquakes particularly under opening cycles, i.e. those causing flexural tension on the inside of the joint. Several techniques of repair and strengthening of reinforced concret...

A large wall with vertical cracks at mid-span, varying in width of up to 3 mm wide, had been declared capable of resisting a postulated seismic load. It was not straightforward to subsequently confirm, analytically, what influence the crack had on the wall’s capacity for lateral loading. It was assumed that it was likely that the horizontal reinforcement had yielded across the crack and thus th...