The surface damage caused by laser irradiation is studied to investigate the possibility of performing a depth-profile analysis of the hydrogen concentration in zircaloy-4 alloys using laserinduced plasma breakdown spectrometry. After laser irradiation, a heat-affected zone extending about 3 μm down from the top surface can be seen. The depth of this heat-affected zone is independent of the las...

The development of ultrashort pulse laser technology will have a strong impact on the advancement of laser machining. Ultrashort laser pulses can reduce the heat-affected zone and the shock-affected zone, resulting in much cleaner cuts, and therefore higher precision. Also, ultrashort laser pulses have shown remarkable promise for processing transparent materials such as glass, fused silica, an...

In this report T-T-T diagram and CCT-Curve from austenitizing temperature 1200•Ž were researched and then effects of preheat temperatures and welding thermal cycle on properties of heat affected zone were clarified to investigate weldagility of 21/4 Cr-1Mo steel and also we carried out a restraind crack test to investigate crack sensitivity of the steel. The results of experiments are summarize...

Conventional assessment of welded joint impact toughness, as defined in relevant standards for welding procedure qualification is based on testing of real specimens taken from base metal, weld metal, and heat affected zone. Here particularly, testing of heat affected zone may become unreliable, mainly due to the welded joint configuration and placement of initial notch. In addition, from genera...

An attempt has been made to determine the strength and impact properties of Cr-Mo steel weld and base materials by varying the current during manual metal arc welding. Toughness over a temperature range from -32 to 100°C of base, heat affected zone (HAZ) and weld zones at three current settings are made. It is observed that the deterioration in notch toughness at any zone with the temperature d...

Objective: To assess the mechanical effects of nickel-titanium orthodontic archwire flaming and their distribution along the wire. Methodology: Two sizes of pre-formed austenitic nickel-titanium archwires were tested (n=10). The terminal 5mm of each wire was heated for five seconds using a butane lighter. Micro-hardness testing was used to determine the heat-affected zone for all wires. Cantile...

deformation pattern of the northeastern part of the iranian-arabian collision zone (i.e., mainly sanandaj-sirjan belt or zone) is the main concern of this paper. here, we investigate the stress distribution and displacement pattern of eghlid-deh bid area as affected by the position of zagros suture using a three dimensional mechanical model. the modeled area is located between the zagros thrust...