The total oxidation of toluene at a wide temperature range (200–500 oC) over micro/mesoporous platinated catalysts has been investigated about activity, selectivity to CO2 and CO, catalyst's stability versus coke deposition and reaction kinetics. Kinetic of toluene oxidation was measured under various oxygen and toluene pressures and als...

Pyrolysis is an applicable method that has been widely used to recover hydrocarbons from Used Lubricating Oil (ULO). However, large-scale application of this approach has been limited by its noticeably energy and time consuming nature. In the present research, it has been attempted to modify the energy and time requirements of ULO pyrolysis using the catalytic effects of metal oxide nanoparticl...

Pyrolysis is an applicable method that has been widely used to recover hydrocarbons from Used Lubricating Oil (ULO). However, large-scale application of this approach has been limited by its noticeably energy and time consuming nature. In the present research, it has been attempted to modify the energy and time requirements of ULO pyrolysis using the catalytic effects of metal oxide nanoparticl...

The conversion and utilization of biomass as an alternative source of energy have been subjects of interest in various countries, but technical barriers to the technology and design of conversion plants have considerably impeded the development and use of alternative power sources. Theoretical studies on the conversion process enhance our understanding of the thermochemical conversion of solid ...

Arsenic, one of the most toxic and dangerous elements in the environment affecting millions of people around the world, is associated with several diseases. In this pilot study, we investigated removal of arsenate from aqueous solutions using chitosan under the influences of initial arsenic ion concentrations, pH, contact time, and adsorbent dosages of chitosan. In order to assess the sorption ...

The objective of this study was to determine the performance of modified commercial powdered activated carbon (MCPAC) in removal of ammonia from aqueous solution. The effects of adsorbent dosage (0.5–1.5 g/L), ammonia concentration (100–200 mg/L), pH (3 to 9) and contact time (2 to 120 min) were examined. In this study, experiments were performed based on Response Surface Methodology (RSM). The...

Introduction: Due to causing methemoglobinemia, different cancers, and teratogen effects in human nitrate contamination of water resources has become a critical environmental problem Therefore, the aim of this work was to determine the optimum condition of nitrate sorption onto magnetic nanoparticle. Materials and Methods: The removal of nitrate from aqueous solutions by magnetic nanoparticles...

In this work the kinetic data demanded for kinetic modeling were obtained in temperatures 350, 400, 450 and 500 oC by conducting experimentations on a Fe-Cr nanocatalyst prepared from a novel method and a commercial Fe-Cr-Cu one. The collected data were subjected to kinetic modeling by using two models derived from redox and associative mechanisms as well as an empirical one. The coefficients o...

Reaction behaviors and kinetics of catalytic oxidation of toluene with different feed flows over Pt/Zr(x)-HMS catalysts with Si/Zr ratio equal to 5, 10, 20 and 35 were investigated over a wide temperature range (200 – 500 oC). Results show that Pt/Zr(x)-HMS performs more easily toluene oxidation. The kinetic data were fitted by the Power-law and Mars–van Krevelen kinetic models. The fitting res...