This paper presented a novel droplet-based pressure sensor using elastic and capacitive electrode-electrolyte interfaces to achieve ultrahigh mechanical-to-electrical sensitivity (1.58 μF kPa(-1)) and resolution (1.8 Pa) with a simple device architecture. The miniature transparent droplet sensors, fabricated by one-step laser micromachining, consisted of two flexible polymer membranes with cond...

Capacitive differential pressure sensor (CPS), which converts an input differential pressure to an output current, is extremely used in different industries. Since the accuracy of CPS is limited due to ambient temperature variations and nonlinear dependency of input and output, compensation is necessary in industries that are sensitive to pressure measurement. This paper proposes a framework fo...

This paper reports a 3-axis fully integrated differential capacitive tactile sensor surface-mountable on a bus line. The sensor integrates a flip-bonded complementary metal-oxide semiconductor (CMOS) with capacitive sensing circuits on a low temperature cofired ceramic (LTCC) interposer with Au through vias by Au-Au thermo-compression bonding. The CMOS circuit and bonding pads on the sensor bac...

Capacitive Pressure Sensors In article number 2205324, Guorong Shan, Miao Du, and co-workers develop a method of liquid-liquid interface contact (MLLC) to pretreat the pristine poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) solutions. By dripping this resultant ink, ring-like film with interconnected networks that prefers high conductivity can be prepared due coffee ring eff...

In this paper, electromagnetic modeling of capacitors and inductors for printed electronic circuits is studied. Capacitors are successfully modeled by two-dimensional finite element software. Capacitive sensor for chemical detection is proposed and tested in water. Inductors are modeled by the integrating through the currents and obtained results have been compared with 3D finite element method...

This paper describes the design and implementation of a radiosonde which can measure the meteorological temperature, humidity, pressure, and other atmospheric data. The system is composed of a CPU, microwave module, temperature sensor, pressure sensor and humidity sensor array. In order to effectively solve the humidity sensor condensation problem due to the low temperatures in the high altitud...

The use of MEMS sensors has been increasing in recent years. To cover all the applications, many different readout circuits are needed. To reduce the cost and time to market, a generic capacitance-to-digital converter (CDC) seems to be the logical next step. This work presents a configurable CDC designed for capacitive MEMS sensors. The sensor is built with a bridge of MEMS, where some of them ...

 We propose a circuit to directly connect a differential capacitive sensor to a microcontroller unit (MCU), which is based on the charge-transfer method and does not need any calibration component. The performance has been tested by emulating the differential capacitive sensor with discrete components. The major uncertainty sources are residual stray capacitances. The maximal deviation obtaine...

Capacitive proximity sensing can be implemented in a wide variety of applications with the use of TI's FDC1004 and with the flexibility of the sensor design in many system environments. Not only are there advantages of using capacitive proximity sensing compared to alternative detection methods, there are also guidelines to follow to ensure maximum performance and stability with the sensing sys...

In this paper, multi-channel capacitive sensor arrays based on microstrip band-stop filters are studied. The sensor arrays can be used to detect the proximity of objects at different positions and directions. Each capacitive sensing structure in the array is connected to an inductive element to form resonance at different frequencies. The resonances are designed to be isolated in the frequency ...