This study is concerned with the synthesizing of Cu-Zn nano-ferrite particles in the laboratory applying simple techniques. The morphology of the synthesized nano-particles was analyzed using Transmission Electron Microscopy (TEM), and the minerals were identified using X-ray diffraction (XRD). The nano material was used to replace 1- 4 percent by weight of Portland cement in cement pastes and ...

The surface area of the individual phyllosilicates (clay minerals) in Athabasca oil sands determined from XRD crystallite size measurements was found to be comparable to the bulk surface area measured by ethylene glycol monoethyl ether adsorption. The primary phyllosilicates are kaolin and illite but the large surface area is imparted by varying degrees of smectitic interstratifications in the ...

This study is concerned with the synthesizing of Cu-Zn nano-ferrite particles in the laboratory applying simple techniques. The morphology of the synthesized nano-particles was analyzed using Transmission Electron Microscopy (TEM), and the minerals were identified using X-ray diffraction (XRD). The nano material was used to replace 1- 4 percent by weight of Portland cement in cement pastes and ...

The dispersion state and the efficiency of mixture different components in a composite film have an important impact on its mechanical optical properties. In present work, impacts treatments disaggregation fibrous clay particles water, properties related cellulose nanofiber (CNF)-based films, were evaluated. X-ray diffraction studies, performed samples sepiolite palygorskite, revealed only mino...

A montmorillonite clay and a palagonitic soil sample were sieved to produce a series of size fractions in order to investigate the role that extremely fine particle sizes play on absorption strengths in martian analog materials. Significant decreases in band strength for both samples were observed as particle size decreased. The less than 5-μm fractions had 1.4-, 1.9-, and 2.2-μm bands that wer...

Single and mixed oxide Al/Zr-pillared clay (Al/Zr-PILC) catalysts were synthesized and tested for catalytic wet air oxidation (CWAO) of aqueous phenol solution under milder conditions, in a semi-batch reactor. The catalysts were synthesized from natural bentonite clay using ultrasonic treatment during the aging and intercalation steps and were characterized <...

The transport of polyacrylic acid capped cadmium telluride (CdTe) quantum dots (QDs), carboxylate-modified latex (CML), and bare silica nanoparticles (NPs) was studied in packed columns at various electrolyte concentrations and cation types. The breakthrough curves (BTCs) of QDs and CML particles in acid-treated Accusand showed significant amounts of increasing deposition with 0.5, 1, and 2 mM ...

A pilot-scale study was initiated to examine the behavior of viruses pulse injected into a distribution system. The influence of a free-chlorine residual and that of virus preadsorption to clay particles was evaluated by tracing the viruses both in the water flow and after elution from the biofilm. These experiments demonstrated, first, that virus preadsorption on 40 mg of Na-montmorillonite pe...

The influence of clay preparation methods on the sorption and hydrolysis of carbaryl (1-naphthyl, N-methyl carbamate) by K+-saturated reference smectite SWy-2 was studied. Four methods were utilized: (1) The reference (or specimen) clay used as received was K+-saturated (hereafter referred to as whole clay). (2) High-speed centrifugation (3295g) of whole clay resulted in a pellet with three dis...