While ERT surveys are useful, Yeh et al. (2002) showed that uncertainties in tracking moisture movement in the Electrical resistivity tomography (ERT), during the past few years, vadose zone on the basis of ERT surveys alone can has emerged as a potentially cost-effective, noninvasive tool for imaging changes of moisture content in the vadose zone. The accuracy be quite significant. They report...

the sorption isotherm and state diagram of sundried, golden and sultana raisins were constructed for investigation and comparison of the product stability. the isotherms were measured at 15, 25 and 35 °c using an isopiestic method and the data were modeled with gab model. glass transition temperatures of the products were measured by differential scanning calorimetery (dsc) and fitted to gordon...

Soil moisture is a spatially heterogeneous quantity in the McMurdo Dry Valleys of Antarctica that exerts a large influence on the biological community and on the thermal state of Dry Valleys permafrost. The goal of this project was to determine whether hyperspectral remote sensing techniques could be used to determine soil moisture conditions in the Dry Valleys. We measured the spectral reflect...

The compression molding of dried fish floss is of great significance to the development of fish product. The compression ratio, relaxation ratio and shatter resistance are selected as the evaluation indicators, effects of particle size, moisture content, amount, and processing methods on the compression molding quality of fish floss are analyzed. The results show that: 1) the moisture content a...

This paper describes dynamic and static measurement methods for wide-range moisture content of agricultural products such as rice and silage. The proposed method uses the attenuation and phase shift of the microwave transmitted signal through a microstrip transmission line (MSTL) sensor. The results of dynamic measurements of rice samples with low moisture content(< 18 %) showed close agreement...

The effect of moisture content and loading rate on mechanical strength of 12 brown rice grain varieties was determined. The results showed that the rupture force of brown rice grain decreased by increasing the moisture content and loading rate. The highest rupture force values was obtained at the moisture content of 8% (w.b.) and loading rate of 10 mm/min; while the lowest rupture force corresp...

Performance of Single Point Monitors (SPMs) was evaluated for measuring aerial ammonia (NH3, 0 to 30 ppm) and hydrogen sulfide (H2S, 0 to 90 ppb) under laboratory and field conditions. Calibration gas or NH3/H2S−ladden air at various dew−point temperatures (tdp) were introduced simultaneously to the SPMs under evaluation and a chemiluminescence NH3 analyzer or a pulsed−fluorescence H2S analyzer...

The thermal conductivity of sunflower seed was determined as a function of moisture content, bulk density and temperature which varies from 0.1 to 30.48% (w.b.) and 437.14 to 352.5 kg/m and 22 to 46°C, 3 respectively. The slope of the linear portion ( T versus ln(t)) method was used to analyze the line source heating data for thermal conductivity determination. Bulk density of sunflower seeds f...

Corn is cultivated in most countries because of high consumption, quality, and food value. This study evaluated needed energy for cutting corn stems in different levels of cutting height and moisture content. For this reason, test device was fabricated and then calibrated. The device works on the principle of conservation of energy. The results were analyzed using split plot design and SAS soft...