drying characteristics of quercus were determined experimentally as a function of temperature, air velocity, and variety (quercus persica and quercus libani). in order to estimate and select a suitable drying curve, five different thin layer drying models were fitted to the experimental data. experiments were performed at the air temperatures of 50, 60 and 70°c. at each temperature level, two a...

the canola drying process was investigated using three laboratory scale dryers connected to a computer which continuously recorded the drying processes of each unit. a completely randomized design (crd) with three replications was used for the statistical analysis. the effect of temperature (40°, 50°, 60°c) and air velocity (1, 2 m/s) on the drying kinetics of a monolayer were studied. the effe...

the effects of a couple of factors (cooking period of wheat: 0, 1 and 3.5 h and temperature of drying 70, 80 and 90 ْc) on drying behavior of tarkhineh during hot-air drying has been investigated. tarkhineh pill samples with 8 cm diameter and 11 mm thickness were dried to 0.64(d.b). results showed that cooking of wheat led to higher water absorption of tarkhineh dough, while increased drying rat...

The purpose of this study was to obtain the best anthocyanin pigment extract powder from 3 types of drying process, vacuum drying, spray drying, and  freeze-drying. The duration and temperature for each type of drying process are 15 h with temperature of 40 oC, 2 h with temperature of 120 oC (inlet) and 60 oC (outlet), 24 h with temperature of -50 o</su...

orange (citrus cinensis) is one of the most important among citrus fruits. the thin layer drying kinetics of orange (thompson variety) slice was here experimentally investigated in a convective dryer and through mathematical modeling and by use of thin layer drying models. drying characteristics of oranges were determined using heated ambient air at temperatures from 40 to 80 °c and velocities ...

Aluminum matrix composites reinforced with Al2O3 and SiC particles (5 Vol%) were produced using the hot powder extrusion method. Extrusion temperature and extrusion reduction in area were chosen in the range of 500 to 600°C and 90 to 95%, respectively. The physical and mechanical properties of the extruded composites such as density, tensile strength, elongation and microhardness were evaluated...

Aluminum matrix composites reinforced with Al2O3 and SiC particles (5 Vol%) were produced using the hot powder extrusion method. Extrusion temperature and extrusion reduction in area were chosen in the range of 500 to 600°C and 90 to 95%, respectively. The physical and mechanical properties of the extruded composites such as density, tensile strength, elongation and microhardness were evaluated...