This research presents the geotechnical zoning map of district 1 in Shiraz municipality with focus on allowable bearing capacity of foundation based on data from 160 boreholes. For this purpose, the mechanical properties are determined according to the results of direct shear, uniaxial, and SPT tests and then safe bearing capacity for strip foundations with widths of 1, 1.5, 2, and 2.5 m, and f...

in this study, a bearing capacity device is designed and fabricated to determine the load-settlement behavior of three circular footing models resting above the ground water table. capillary rise in the studied well graded sand is measured and the level of the water table is controlled at the desired heights during each bearing capacity test. moreover, shear strength parameters and soil water r...

in shallow foundations, the third bearing capacity factor, n, has been found to show a decreasing tendency with increasing the foundation size. it is supported by experimental observations and related mainly to stress level dependent nature of the soil. on the other hand, the bearing capacity is often obtained theoretically without consideration of the foundation vertical displacements. in thi...

Experiments to determine the horizontal static bearing capacity are carried out first. The static bearing capacity is a reference for choosing the amplitudes of dynamic load. Then a series of experiments under dynamic horizontal load are carried out in laboratory to study the influences of factors, such as the scales of bucket, the amplitude and frequency of load, the density of soils etc.. The...

This paper investigates response of triangular shell strip footings situated on the sandy slope. A series of reduced-scale plate load tests were conducted to cover different parameters including three shell footing types with different apex angles in addition to a flat footing, four different distances for strip footings from the crest of the slope namely “edge distance” and reinforcement statu...

Solving the static equilibrium position is one of the most important parts of dynamic coefficients calculation and further coupled calculation of rotor system. The main contribution of this study is testing the superlinear iteration convergence method-twofold secant method, for the determination of the static equilibrium position of journal bearing with finite length. Essentially, the Reynolds ...

in many structures, the applied lateral loads are comparable with gravity loads. these types of piles which are subject to high lateral load are usually divided into two categories including long and short piles. the general methods to estimate lateral bearing capacity of short and long piles are based on ultimate bearing capacity and allowable horizontal displacement respectively. in the prese...

A finite element program based on elastic –plastic model of Mohr-Coulomb criterion was used to evaluate the bearing capacity coefficients of soil under shallow strip flexible footing . The results were compared with others’ analytical results and it was found that the present study could offer quite consistent and rather precise values for the bearing capacity coefficients . The effect of d...