Oxides of Nitrogen are the major emission from a diesel engine. It is due to heterogeneous diffusion combustion system with fuel-rich regions, which produce high local temperature around the periphery of the spray where high formation rate of NO is promoted. Various techniques are therefore employed to reduce the NOX emission like EGR, SCR, etc. In this present work a rotating injector is a tec...

oxides of nitrogen are the major emission from a diesel engine. it is due to heterogeneous diffusion combustion system with fuel-rich regions, which produce high local temperature around the periphery of the spray where high formation rate of no is promoted. various techniques are therefore employed to reduce the nox emission like egr, scr, etc. in this present work a rotating injector is a tec...

The present study conducted experimental investigation on combustion and emission characteristics of compression ignition engine using diesel as pilot fuel and methane, hydrogen and methane/hydrogen mixture as gaseous fuels at 1800 rev min. The effect of gaseous fuel on peak cylinder pressure and heat release is modest at low to medium loads. At high load, the high combustion temperature and hi...

one of the methods to reduce the emissions in a diesel engine is by oxygen introduction into the combustion chamber which can be done by supplying the oxygen into the inlet manifold during suction stroke. oxygen affects different parameters such as brake thermal efficiency, fuel consumption, nox and smoke at different load conditions. load test was conducted for various concentrations of oxygen...

Homogenous Charge Compression Ignition (HCCI) engines hold promise of high fuel efficiency and low emission levels for future green vehicles. But in contrast to gasoline and diesel engines, HCCI engines suffer from lack of having direct means to initiate combustion. A combustion timing controller with robust tracking performance is the key requirement to leverage HCCI application in production ...

in the present work, the simultaneous effects of fuel injection rate and injection of air jet into the combustion chamber on exhaust emissions, combustion process and performance parameters in a direct injection diesel engine were investigated. in order to create an air jet, a design was presented in which a secondary chamber (air cell) was created inside the cylinder and was joined to the main...

The effort of many manufacturers of heat sources is to achieve the maximum efficiency of energy transformation chemically bound in the fuel to heat. Therefore, it is necessary to streamline the combustion process and minimize the formation of emission during combustion. The paper presents an analysis of the combustion air temperature to the heat performance and emission parameters of burning bi...

Air pollution is one of the major issues about the diesel engines in todays' world. It is a special concern in those areas that have difficulty meeting health-based outdoor air quality standards. Natural gas has low emission and resource abundance and also conventional compression ignition engine can be easily converted to a dual fuel mode to use natural gas as main fuel and diesel as pilot ...

  This paper presents a modeling study of a CNG Homogenous Charge Compression Ignition (HCCI) engine using single-zone and multi-zone combustion models. Authors' developed code could be able to predict engine combustion and performance parameters in closed part of the engine cycle. As detailed chemical kinetics is necessary to investigate combustion process in HCCI engines, therefore, GRI-m...

Atmospheric particulate matter can be strongly affected by smoke from biomass combustion, including wildfires, prescribed burns, and residential wood burning. Molecular source tracer techniques help determine contributions of biomass smoke to particle concentrations if representative source profiles are available. Various wood smoke source profiles have been generated for residential wood burni...