run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...

‏‎the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...

in this thesis, we consider a mathematical model of cancer with completely unknown parameters. we study the stability of critical points which are biologically admissible. then we consider a control on the system and introduce situations at which solutions are attracted to critical points and so the cancer disease has auto healing. the lyapunov stability method is used for estimating the un...

a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...

a one dimensional dynamic model for a riser reactor in a fluidized bed catalytic cracking unit (fccu) for gasoil feed has been developed in two distinct conditions, one for industrial fccu and another for fccu using various frequencies of microwave energy spaced at the height of the riser reactor (fccu-mw). in addition, in order to increase the accuracy of component and bulk diffusion, instanta...

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

due to lack of knowledge management system in the organization of technical and vocational university of iran (tvuni) and losing good employees because of retirement and substitution causes huge amount of costs to replace the similar expertise. there is no any suitable system in the tvuni to store, to document, and to distribute knowledge. based on the university’s features such as it has diffe...

since esp received universal attention to smooth the path for academic studies and productions, a great deal of research and studies have been directed towards this area. swales’ (1990) model of ra introduction move analysis has served a pioneering role of guiding many relevant studies and has proven to be productive in terms of helpful guidelines that are the outcome of voluminous productions ...

the purpose of this study was to examine the status of supervision on departments’ heads at ferdowsi university of mashhad (fum) and realize some applied themes to provide a fit model for supervising departments’ heads in fum. the method was case study under a research category aimed for applied one. using purposive sampling, interviews were conducted with top fum managers, head departments, an...

the primary goal of the current project was to examine the effect of three different treatments, namely, models with explicit instruction, models with implicit instruction, and models alone on differences between the three groups of subjects in the use of the elements of argument structures in terms of toulmins (2003) model (i.e., claim, data, counterargument claim, counterargument data, rebutt...