different construction materials with different roughness used to make circular weirs highly affect surface roughness and, in turn, flow hydraulics passing over these structures.  in the present research, numerous experiments under different hydraulic conditions were performed on a physical model to study the effects of roughness on flow hydraulics over a circular weir. the flow hydraulics incl...

Technological advances have facilitated many developments in the MEMS, electrical, medical and aerospace industries in recent years. As the devices commonly found in these industries have become smaller, so the requirements for high-precision machining techniques have become ever more pressing. Nowadays, micro-machining processes are playing an important role in satisfying these requirements. A...

This paperpresentsexperimental investigationsandfinite element simulationsonmicro-millingofTi–6Al– 4V alloy with fine grain uncoated and cBN coated micro-end mills. Micro-milling of Ti–6Al–4V using uncoated and cBN coated tungsten carbide micro-end mills are conducted; surface roughness, burr formation and tool wear are measured. Effects of machining parameters on surface roughness, burr format...

Water harvesting is the collection of runoff for productivity purposes, instead of runoff being left to cause erosion. In arid and semi-arid drought-prone areas, micro-catchments are widely used as a water harvesting method to improve rangeland condition. The aim of present study was to investigate the effects of micro-catchment on ecological indices of rangeland health in Ghick-Sheikhha, Jirof...

lapping is one of the most important polishing processes which can be used to fabricate flat and smooth surfaces. in this paper, the effect of lapping characteristics and mesh number of abrasive particles are studied on the surface roughness and flatness for the machining of hardened aisi 52100 rings. the most significant lapping characteristics are pressure, lap plate speed and time. scanning ...

Burnishing is a chip-less finishing process, in which a hard roller or ball presses the surface layer of part to perform plastic deformation in the surface layer and produce improved finish, enhanced hardness and compressive residual stresses on the surface of special materials such as Aluminum and Brass. In the following research, the effect of input parameters such as feed rate, cutting speed...

We report on the successful realization of a contactless, non-perturbing, displacement-measuring system for characterizing the surface roughness of polymer materials used in tribological applications. A single, time-dependent, scalar value, dubbed the collective micro-asperity deformation, is extracted from the normal-displacement measurements of normally loaded polymer samples. The displacemen...

This paper examines the use of Light Interferometry and the relevant parameters used to measure copper surface roughness before and after oxide alternative. Also discussed are the limitations and drawbacks of some of the traditional measurement parameters as they apply to copper surface roughness for conductor loss and signal integrity characterization and process control. In the PCB industry, ...

Effects of laser shock processing (LSP) on the cavitation erosion resistance of laser weldments were investigated by optical microscope (OM), scanning electron microscope (SEM) observations, roughness tester, micro hardness tester, and X-ray diffraction (XRD) technology. The morphological microstructures were characterized. Cumulative mass loss, incubation period, erosion rate, and damaged surf...