نتایج جستجو برای: kinetic and isotherm of adsorption
تعداد نتایج: 24068456 فیلتر نتایج به سال:
In this study, cadmium sulfide nanoparticles (CdS NPs) were prepared, characterized and used as a new adsorbent for simultaneous removal of Pb(II) and Cu(II) ions from aqueous solutions. Using a batch adsorption method, the effects of solution pH, contact time, adsorbent dose, and temperature were studied and optimized. Removal efficiencies, higher than 98% were obtained for both the met...
background and objectives: activated carbon is an adsorbent which is mostly employed in order to remove dye from aqueous solutions; however, commercial activated carbon is expensive and this is considered as an obstacle for its usage. therefore, the present study aimed to use waste paper as an inexpensive precursor to produce activated carbon. materials and methods: in the present study, koh wa...
Chemically modified kenaf core fibres were prepared via esterification in the presence of citric acid (CA). The adsorption kinetics and isotherm studies were carried out under different conditions to examine the adsorption efficiency of CA-treated kenaf core fibres towards methylene blue (MB). The adsorption capacity of the kenaf core fibres increased significantly after the citric acid treatme...
in this thesis a calibration transfer method is used to achieve bilinearity for augmented first order kinetic data. first, the proposed method is investigated using simulated data and next the concept is applied to experimental data. the experimental data consists of spectroscopic monitoring of the first order degradation reaction of carbaryl. this component is used for control of pests in frui...
in solvo-hydrothermal method, xrd pattern was indicated presence of intermediate of ammonium octatmolybdate and ammonium tetramolybdate, which were changed to stble phase of ?-moo3 annealing. sem images were indicated nanoparticle with semispheical morphology and tem image was demonstrated nanoparticles with a diameter size of 25nm. also in impregnate method. the xrd pattern was shown high crys...
Background and Objective: Dyes have complicated structures, usually toxic and resistant to biological treatment which entered to environment by industrial waste streams. The aim of this study was the survey of isotherm and kinetic adsorption studies of Reactive Blue 19 (RB19) dye onto Barberry stems powder from textile industrial wastewater. Materials and Methods: This study was done i...
background and aims: from the past studies, it has been proved that consumption of heavy metals by humans may cause several chronicle problems like cancer, kidney and liver damage, high blood pressure and low blood pressure problems and etc. so, it has become very crucial to remove these heavy metals from industrial wastewater. the aim of this study was to find out a low cost and easy available...
In this paper, dye removal ability of the surface modified nanoparticle SMN copper ferrite from single and quaternary systems was investigated. Acid Blue 92 AB92, Direct Green 6 DG6, Direct Red 23 DR23 and Direct Red 80 DR80 were used as model compounds. The effect of surfactant concentration, adsorbent dosage, dye concentration and pH on dye removal was evaluated. The adsorption isotherm and k...
In the present study, CeO2/Fe2O3 nanocomposite was prepared by co-precipitation method and its application was investigated for arsenic removal from water. Characterization of the nano sized adsorbent particles was carried out using SEM and XRD techniques. Systemic adsorption experiments were performed in batch systems and the optimum conditions were obtained. The effects of p...
background: the efficacy of nh4cl-induced activated carbon (nac) was examined in order to adsorb rr198, an azo reactive model dye, from an aqueous solution. methods: the effects of ph (3 to 10), adsorbent dose (0.1 to 1.2 g/l), dye concentration and contact time on the adsorption efficiency were investigated. results: the results showed that the removal of dye was highest at a solution ph of 7 ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید