A thin coal seam mined as a protective coal seam above a gas outburst coal seam plays a central role in decreasing the degree of stress placed on a protected seam, thus increasing gas permeability levels and desorption capacities to dramatically eliminate gas outburst risk for the protected seam. However, when multiple layers of coal seams are present, stress-relieved gas from adjacent coal sea...

productivity of an oil well is an important parameter in any oil field development. low production rate of the wells, impose more production wells drilling which directly jeopardizes the economical feasibility of the project. oil production rate in some of the wells is very low due to low permeability of the reservoir rock. several practice like hydraulic fracturing and acid fracturing is very ...

In paper 1 of this two-part series we described a three-dimensional numerical inverse model for the interpretation of cross-hole pneumatic tests in unsaturated fractured tuffs at the Apache Leap Research Site (ALRS) near Superior, Arizona. Our model is designed to analyze these data in two ways: (1) by considering pressure records from individual borehole monitoring intervals one at a time, whi...

Predicting the wear performance of circular diamond saw in the process of sawing hard dimensional stone is an important step in reducing production costs in the stone sawing industry. In the present research work, the effective parameters on circular diamond saw wear are defined, and then the weight of each parameter is determined through adopting a fuzzy rock engineering system (Fuzzy RES) bas...

Wall displacements and ground pressure acting on the lining of a tunnel increase with time. These time-dependent deformations are both due to face advance effect and to the time-dependent behavior of the rock mass.  Viscoelastic materials exhibit both viscous and elastic behaviors. Thorough this study, the effect of different linear viscoelastic models including Maxwell, Kelvin and Kelvin-Voigt...

This study aimed to develop new statistical models for evaluating the specific ampere draw (SI) based on rock brittleness index in rock sawing process. A variety of rocks, including carbonate and granite, were cut by a fully instrumented laboratory-sawing rig with two different types of circular diamond saws. Laboratory tests were performed at different depths of cut and feed rates. Multiple cu...

A new automatic method for discontinuity traces mapping and sampling on a rock mass digital model is described in this work. The implemented procedure allows one to automatically identify discontinuity traces on a Digital Surface Model: traces are detected directly as surface breaklines, by means of maximum and minimum principal curvature values of the vertices that constitute the model surface...