In this paper, the performance of the cutting tool with nanocrystalline multilayer coatings (TiN+TiAlN) for machining of superalloy Inconel 718 in the dry and wet conditions was studied. The multi layer TiN and TiAlN with nanocrystalline structure was applied by physical vapor deposition technique (arc evaporation) on the WC-Co inserts. The results of the ball on disc wear test and the machinin...

In this study, four protective coating materials: Inconel 718, 625, Alloy 33 and Stellite 6 were deposited on 16Mo3 steel tubes by means of CMT (Cold Metal Transfer), as an advanced version MAG (Metal Active Gas) welding method. the next step, surface was remelted TIG (Tungsten Inert SEM microstructure coatings–substrate has been reported, EDX-researched chemical composition coatings compared t...

Using high throughput method of 3D printing, 20 Inconel 718 alloy samples with different Nb contents (0∼10 wt.%) are conveniently prepared in a single printing process, and then analyzed the microscopic morphology hardness these samples. The results show that increase content alloy, Laves phase gradually increases, particles also become larger, resulting gradual hardness. In conclusion, new tec...

ABSTRACT Inconel 718 is a difficult-to-cut nickel-based superalloy commonly used in aerospace industry. This paper presents an experimental study of the tool wear propagation and cutting force variations in the end milling of Inconel 718 with coated carbide inserts. The experimental results showed that significant flank wear was the predominant failure mode affecting the tool life. The tool fla...

The main objectives of this research are, therefore, to assess the effects of process parameters and to determine their optimal levels machining of Inconel 718 super alloy. gap voltage, current, time of machining and duty factor are tuning parameters considered to be study as process input parameters. Furthermore, two important process output characteristic, have been evaluated in this research...

Abstract. This presentation shows that superplasticity is achieved in hard-to-deform materials when they are processed by severe plastic deformation (SPD) through high-pressure sliding (HPS). The HPS process similar to the torsion (HPT) as straining made under high pressure highly constrained conditions. It applicable a sheet form of samples while HPT uses disks or rings, and thus it has advant...

Super-alloys encompass great challenges in machinability. One such alloy of much interest applications is Inconel 718. Its increased hardness, low thermal diffusivity and high temperature strength make it desirable for applications, at the same time rendering its machining a demanding task. Extensive studies have been performed on machinability 718, from turning process stand-point. However, th...

Abstract Inconel 718, a nickel, chrome and iron alloy, has special advantages, such as high-temperature strength, thermal resistance corrosion resistance, which facilitate wide usage in the aerospace industry, especially hot sections of gas turbine engines. However, machining this alloy is correlated closely with material’s inherent properties excellent combination hardness toughness, low condu...