In this work the kinetic data demanded for kinetic modeling were obtained in temperatures 350, 400, 450 and 500 oC by conducting experimentations on a Fe-Cr nanocatalyst prepared from a novel method and a commercial Fe-Cr-Cu one. The collected data were subjected to kinetic modeling by using two models derived from redox and associative mechanisms as well as an empirical one. The coefficients o...

In the present study, flow over flat and pooled stepped spillways was simulated three dimensionally. The VOF method and k- ε (RNG) turbulent model was used to simulate the flow over the stepped spillway. The results indicated that the numerical model was acceptably capable of simulating the flow over the pooled and flat stepped spillways for different discharges. Following that, the effect of d...

The kinetics of molybdenite oxidation was studied by non-isothermal TGA-DTA with heating rate 5 ºC.min-1.The model-fitting kinetic approach applied to TGA data .The Coats-Redfern method used for model fitting. The popular model-fitting gives excellent fit for non-isothermal data in chemically controlled regime. The apparent activation energy was determined to be about 34.2 kcalmo...

Humans and other animals exchange gravitational potential energy (GPE) and kinetic energy (KE) of the center of mass during level walking. How effective is this energy exchange during downhill and uphill walking? Based on previous reports and our own reasoning, we expected that during downhill walking, the possibility for mechanical energy exchange would be enhanced and during uphill walking, t...

thermal cracking of a heavy liquid hydrocarbon was performed in a laboratory scale tubular reactor. central composite design (ccd), was used as an experimental design method. the design variables were coil outlet temperature (cot), feed flow and rate steam ratio. maximum yield of ethylene was 30.37 wt% at cot, residence time and steam ratio of 869oc, 0.208 s and 1.22 g/g, respectively. maximum ...

in this study, the turbulent kinetic energy redistribution process is investigated. to this aim, the direct numerical simulation (dns) of incompressible flow of a newtonian fluid through a channel at a shear reynolds number of reτ = 180 is used to produce a flow data base. then, these data are statistically analyzed. the turbulent kinetic energy redistribution is studied using the pressure-stra...

   In this study, cadmium sulfide nanoparticles (CdS NPs) were prepared, characterized and used as a new adsorbent for simultaneous removal of Pb(II) and Cu(II) ions from aqueous solutions. Using a batch adsorption method, the effects of solution pH, contact time, adsorbent dose, and temperature were studied and optimized. Removal efficiencies, higher than 98% were obtained for both the met...

This study investigated the feasibility of Date-palm) Phoenix dactylifera (Leaf Ash (DLA) (an inexpensive agricultural-byproduct) as an application to adsorb Pb(II) ions. An adsorption process was carried out to evaluate initial concentration Pb(II) ions, adsorbent dose, contact time, pH and temperature on the systematic removal of Pb(II). The effects were examined and results showed that remov...