Attempts should be made to recycle, re–use and utilize waste. Paper manufacturing is a complex industry involving multiple processes where different products are produced and large quantities of waste of primary, biological or de–inking origin are generated, waste water treatment sludge, primary sludge, and secondary sludge among them.1,2 The primary sludge is generated in the largest quantitie...

The performance of mesophilic anaerobic digesters of four large Italian wastewater treatment plants without primary sedimentation were studied. Only the waste activated sludge is stabilised by means of the mesophilic (35–37 8C) anaerobic digestion process. The anaerobic digesters generally worked with a hydraulic retention time in a range of 20–40 days and an organic loading rate of some 1 kg V...

in the present study, the increase of organic loading rate (olr) influences the biomethanisation of sewage sludge. the research was conducted at technical scale in wastewater treatment plant in tyrowo (near ostróda, poland). it has been shown that the increase of olr, by adding co-substrates, cause the increase of biogas production but not biogas yield coefficient. the substrates used for anaer...

Anaerobic digestion (AD) has long been used to treat different types of organic wastes especially in the developed world. However, organic wastes are still more often considered as a waste instead of a resource in the developing world, which contributes to environmental pollution arising from their disposal. This study has been conducted at Bugolobi Sewage Treatment Plant (BSTP), where two orga...

sludge production is an avoidable problem arising from the treatment of wastewater. the sludge remained after municipal wastewater treatment contains considerable amounts of various contaminants and if is not properly handled and disposed, it may produce extensive health hazards. on the other hand, this sludge has benefits for plants and soils. thereupon, land application of sludge has received...

A steady state model for anaerobic digestion of sewage sludge is developed that comprises three sequential parts – a kinetic part from which the % COD removal and methane production are determined for a given retention time; a stoichiometry part from which the gas composition (or partial pressure of CO2), ammonia released and alkalinity generated are calculated from the %COD removal; and a carb...

The addition of 59 mM nitrate inhibited biogenic sulfide production in dilute sewage sludge (10% [vol/vol]) amended with 20 mM sulfate and either acetate, glucose, or hydrogen as electron donors. Similar results were found when pond sediment or oil field brines served as the inoculum. Sulfide production was inhibited for periods of at least 6 months and was accompanied by the oxidation of resaz...