In this paper, a CMOS low power amplifier based on a high-quality active inductor and implemented by using 0.25-μm 1P5M CMOS standard technology is presented. The amplifier achieves power gain (S21) of 18dB within the -3dB cutoff frequency, bandwidth of 1.3GHz, and power consumption of 18mW under 2.5V power supply in 188 × 174μm silicon area. The input third-order intercept point (IIP3) and the...

Piezoelectric amplifier is a very important part of the piezoelectric actuator. It does not only require high positioning accuracy, but also high frequency response. This paper designs the error amplifier drive power consisting of high-voltage op amp and discrete components, consisting of an error-amplified circuit, a power amplifier circuit, a feedback network and a discharge circuit. A compen...

Problem statement: Pipelined architecture is considered to be the most suitable for highspeed and high-resolution applications among varies Nyquist Analogue to Digital Converters (ADCs) in nowadays digital signal processing domain. But the pipeline power consumption is growing with the technology scaling. For a pipeline ADC with high speed and high resolution, the fore-end track and hold amplif...

In RFID reader systems, power amplifier plays a critical rule for efficiency enhancement. A high efficiency power amplifier may not only increase the life expectancy of portable RFID devices but also reduce the reliance on heat sinks. Heat sinks usually occupy plenty of space and lead to packing difficulties. A well-designed power amplifier with high efficiency and output power may also increas...

A two stage sub-µW Inverter-based switched-capacitor amplifier-filter is presented which is capable of amplifying both spikes and local field potentials (LFP) signals. Here we employ a switched capacitor technique for frequency tuning and reducing of 1/f noise of two stages. The reduction of power consumption is very necessary for neural recording devices however, in switched capacitor (SC) cir...

A broadband power amplifier designed and implemented in Doherty configuration is illustrated in this paper. Both input and output networks adopt the broadband matching topology. Additionally a compensation network, consisting of a series transmission line shunted with a capacitance, is set behind the peak amplifier to avoid in-band power leakage in the low-power section while at the cost of pea...

Two high efficiency Ku-band pHEMT power amplifier MMICs are presented in this paper. A single stage, high efficiency amplifier provides a peak power added efficiency of 57.6% with 10.5 dB associated gain and 26.5 dBm output power into a 50Ω load at 14 GHz. Additionally, a dual stage, high gain amplifier provides a peak power added efficiency of 50.4% with 19.7 dB associated gain and 27.5 dBm ou...

In this paper, a resistive-reactive series of continuous inverse modes is proposed for extending bandwidth of the series of Inverse continuous mode (SICM). A broadband class inverse F power amplifier (PA), which operates across 2.5-4.1GHz (48.5% bandwidth), is designed by using bare GaN HEMT to prove this theory. Experiment results indicate that the PA mentioned above is able to output 9.1-18.4...