نتایج جستجو برای: Angle of Intake

تعداد نتایج: 21182749  

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه صنعتی (نوشیروانی) بابل - دانشکده مهندسی مکانیک 1389

due to the limiting workspace of parallel manipulator and regarding to finding the trajectory planning of singularity free at workspace is difficult, so finding a best solution that can develop a technique to determine the singularity-free zones in the workspace of parallel manipulators is highly important. in this thesis a simple and new technique are presented to determine the maximal singula...

ژورنال: علوم آب و خاک 2018

Rivers has long been regarded as one of the most basic human water supplies. If the topography, a morphology, water requirements conditions, etc. allow water to be transferred to gravity, the use of the dike can have a significant impact on the flow rate and the sediment input to Intake. Dike design needs to consider several parameters such as position, length, type, etc. Using a good design ca...

ژورنال: علوم آب و خاک 2017
حلوائی فرد, مهران, مسجدی, علیرضا,

One of the methods for sediment control in lateral intake can be application of submerged vanes in front of the inlet. The establishment of submerged vanes in flow path causes a flow diversion toward the inner arc. In this research, the performance of submerged vanes on sediment transport to the inlet at 180 degree of intake has been investigated. Several experiments were carried out in a labor...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه امام رضا علیه السلام - دانشکده ادبیات و زبانهای خارجی 1392

cognitive studies of translation process have recently been awarded a great deal of attention. there exists a psychological angle to almost all translation activities. the present study, thus, deals with analysing the relationships between iranian prospective translators tolerance for ambiguity (ta) and their willingness to translate (wtt). the research was conducted as a mixed methods study, d...

Investigating the features and flow behavior and related component is one of the complex phenomena that make using of software inevitable. The rivers carry sediment content along with water which is created by erosion of riverbed sediment and erosion caused by rainfall or surface runoff flowing over the catchment area. If the action of river dewatering occurs, the entry of sediment into the int...

A. Keshavarzi and M. J. Kazemzadeh Parsee,

Flow separation at water intake is the main cause of head loss and flow discharge reduction. &#10As a result, study of shape and size of separation is very essential when designing an optimum water intake. Water intake is normally built with a 90 degree angle to the main channel flow direction. However, the flow structure in this type of water intake consists of large separation size along wit...

A. Keshavarzi and M. J. Kazemzadeh Parsee,

Flow separation at water intake is the main cause of head loss and flow discharge reduction. As a result, study of shape and size of separation is very essential when designing an optimum water intake. Water intake is normally built with a 90 degree angle to the main channel flow direction. However, the flow structure in this type of water intake consists of large separation size along with ...

Journal: :تحقیقات مهندسی کشاورزی 0
سعید گوهری استادیار گروه مهندسی آب دانشگاه بوعلی سینا سیدعلی ایوب زاده دانشیار گروه مهندسی سازه های آبی دانشگاه تربیت مدرس مسعود قدسیان استاد گروه مهندسی عمران دانشگاه تربیت مدرس سیدعلی اکبر صالحی نیشابوری استاد گروه مهندسی عمران دانشگاه تربیت مدرس

flow passing through lateral intakes and channel junctions is turbulent. sediment flow and bed forms areaffected by these flow patterns and vice versa. in this research, a laboratory study was carried out toexplore a possible method for sediment control for a set of submerged vanes and a single spur dikesimultaneously. since a larger portion of the near-bed flow was diverted, the intake receive...

The one dimension computational model of a sequential injection engine, which runs on compressed natural gas (CNG) with spark ignition, is developed for this study, to simulate the performance of gas flow pressure profile, under various speed conditions. The computational model is used to simulate and study of the steady state and transient processes of the intake manifold. The sequential injec...

Journal: :مدیریت آب و آبیاری 0
لیلا داودی دانشجوی کارشناسی ارشد گروه سازه¬های آبی، دانشکده مهندسی علوم آب، دانشگاه شهید چمران اهواز، اهواز محمود شفاعی بجستان استاد گروه سازه های آبی، دانشکده مهندسی علوم آب، دانشگاه شهید چمران اهواز، اهواز

construction of the intake structures to divert some portion of flow water from a main channel causes some variations of flow conditions at the intake entrance. these variations cause the reinforcement of the eddy flow and sedimentation in the bank of the intake. an effective measure to control the entry sediment is the use of submerged vanes. most of previous studies in this regards have been ...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید