a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...

run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...

a one dimensional dynamic model for a riser reactor in a fluidized bed catalytic cracking unit (fccu) for gasoil feed has been developed in two distinct conditions, one for industrial fccu and another for fccu using various frequencies of microwave energy spaced at the height of the riser reactor (fccu-mw). in addition, in order to increase the accuracy of component and bulk diffusion, instanta...

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

abstract nowadaysphotovoltaic solar cells (pvs) areacknowledged the fastest growing energy technology in the word, however, they only account for only fraction of current global renewable energy capacity. it isrecognized that this incomplete market penetration has been largely a result of the technology’sexcessive cost. so researchers are trying to find innovative, economic way with theaim of ...

in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...