tellurium nanostructures have been prepared by physical vapor deposition method in a tube furnace. the experiments were carried out under argon gas flow at a pressure of 1 mbar. tellurium powder was evaporated by heating at 350°c and 430°c and was condensed on substrates at 110–250°c, in the downstream of argon gas flow. the products were characterized by field emission scanning electron micros...

Tellurium nanostructures have been prepared by physical vapor deposition method in a tube furnace. The experiments were carried out under argon gas flow at a pressure of 1 mbar. Tellurium powder was evaporated by heating at 350°C and 430°C and was condensed on substrates at 110–250°C, in the downstream of argon gas flow. The products were characterized by field emission scanning electron micros...

Tellurium nanostructures have been prepared by physical vapor deposition method in a tube furnace. The experiments were carried out under argon gas flow at a pressure of 1 mbar. Tellurium powder was evaporated by heating at 350°C and 430°C and was condensed on substrates at 110–250°C, in the downstream of argon gas flow. The products were characterized by field emission scanning electron micros...

The purpose of this study was to evaluate the effects of the rate of argon gas flow on joint strength in the laser-welding of cast metal plates and to measure the porosity. Two cast plates (Ti and Co-Cr alloy) of the same metal were abutted and welded together. The rates of argon gas flow were 0, 5 and 10 L/min for the Co-Cr alloy, and 5 and 10 L/min for the Ti. There was a significant differen...

A modified indicator gas washout method was developed to measure functional residual capacity (FRC) during high-frequency oscillatory ventilation (HFOV) without interruption of HFOV. A hot-wire flowmeter and medical gas analyzer measured the flow rate and argon concentration, respectively, at the expiratory end of the respiratory circuit. Upstream of the hot-wire flowmeter, two heat-and-moistur...

the nanoparticles of ti and tio2 have attracted extensive research interest because of their diverse applications in, for instance, catalysis, energy conversion, pigment and cosmetic manufacturing and biomedical engineering. through this project, a one-step bulk synthesis method of electromagnetic levitational gas condensation (elgc) was utilized for the synthesis of monodispersed and crystalli...

Three-dimensional finite-volume-based numerical models of fluid, heat, and mass transport have been developed and applied to help explain the complex inter-related phenomena of multiphase fluid flow, superheat dissipation, and grade intermixing during the continuous casting of steel slabs. Gas bubbles are simulated using a continuum model, which calculates the volume fraction and velocities of ...

The growth rate and uniformity of Carbon Nano Tubes (CNTs) based on Chemical Vapor Deposition (CVD) technique is investigated by using a numerical model. In this reactor, inlet gas mixture, including xylene as carbon source and mixture of argon and hydrogen as  carrier gas enters into a horizontal CVD reactor at atmospheric pressure. Based on the gas phase and surface reactions, released carbon...

A new approach to calculate the axially symmetric binary gas flow is proposed Dalton’s law for partial pressures contributed by each species of a binary gas mixture (argon and helium) is incorporated into numerical simulation of rarefied axially symmetric flow inside a rotating cylinder using the time relaxed Monte-Carlo (TRMC) scheme and the direct simulation Monte-Carlo (DSMC) method. The res...