cylindrical thin-walled tubes due to construction and easy installation, high energy absorption capacity are used in the automotive industry as an impact energy absorber. however, the main weakness of cylindrical tubes is in the high initial peak load. therefore, in this paper, to overcome this weakness, a buckling initiator is used at the top of the tube. this buckling initiator is a steel rod...

The effect of cell size on the out of plane compressive crushing response of circular cell polycarbonate honeycomb is presented. Over 100 experiments were conducted on specimens ranging in size from 1 to 169 cells (number of cells=N). Experiments showed that for N<19 there was a significant increase in crushing load. The maximum crushing load was observed where N=7. Finite element (FE) analysis...

this study aims to numerically investigate on the crashworthiness of thin-walled square tubes by consideration of 3-d oblique loading. in this type of loading, direction of loading is defined by using two spatial angles relative to the position of the tube. to this aim, finite element (fe) analysis is employed to simulate the loading for 8 different numerical models with different loading orien...

The main objective of this research is to improvethe design and performance of the polyurethane foam-filled thin-walled aluminum grooved circular tubes using multi-response optimization (MRO) technique. The tubes are shaped with the inner and the outer circular grooves at different positions along the axis. For this aim, several numerical simulations using ABAQUS finite element explicit code ar...

A challenge in numerical simulation of crashworthiness study is to be able to predict the crush damage modes, their evolution during crushing and the energy absorption in any composite structure from elementary material characterisation data. Therefore, it is important to know the behavior of one ply subjected to crushing load, and especially to determine the mean crushing stress that could be ...

Effect of geometry on crushing behavior, energy absorption and failure mode of woven roving jute fiber/epoxy laminated composite tubes were experimentally studied. Investigations were carried out on three different geometrical types of composite tubes (circular, square and radial corrugated) subjected to axial compressive loading. It was observed in axial crushing study that the load bearing ca...

Crushing and screening processes are often regulated using relay-based on/off controls or, when controlled by PID controllers, the control design is limited to a single crusher and its proximity. The design does not necessarily consider process interactions, load disturbances and, in a wider perspective, does not treat a crushing and screening plant as an entity from feeding to product piles. T...

In this paper, considering symmetric collapse mode for hybrid tubes, and using Tsai-Hill fracture criterion to take into account the off-axis strength of an orthotropic lamina, an analytical model is extended and an expression is derived for mean crushing load and fold lengths of circular hybrid tubes. In this model, the influences of the geometrical dimensions including diameter, thickness of ...

Studies of the crushing behavior of closed-cell, aluminum foam-filled aluminum and steel tubes have shown an interaction effect between tube wall and foam filler [1, 2, 3]. The crushing loads of foam-filled tubes are, therefore, found to be higher than the sum of the crushing loads of foam (alone) and tube (alone) mainly due to this effect. Santosa et al. [1], based on FEM results, proposed the...