Numerous studies have been done in the past to identify the phases present in dental amalgam. Both metallographic and X-ray diffraction techniques have been used.-' Most researchers now presume that dental amalgam consists mainly of three phases. The original particle is an alloy of Ag, Sn, Cu, and sometimes Zn; the major portion is the compound Ag3Sn, which is often referred to as Py. After am...

A high quality joint between tool steel and stainless steel alloys is hard to achieve with the conventional welding process. In this study, a new process of joining semi-solid AISI D2 tool steel and AISI 304 stainless steel using a partial remelting method is proposed. Metallographic analysis and Vickers hardness tests were performed. The results obtained from investigating the basic geometries...

in this research the effect of volume and morphology of eutectic carbides on tribological behaviour of ni-hard 4 cast irons have been investigated. therefore, as a result of the fact that the carbon content effects the carbides morphology of ni-hard cast irons, the chemical compositions of five different specimens were kept constant with the exception of the carbon content, which was varied fro...

Effect of the addition of various inoculants on the morphology and mechanical properties of low C-Mn and low alloy steel samples is studied by thermal and mechanical processing of the samples after solidification. According to the results obtained from metallographic studies with the electron microscope and microanalysis with x-rays, the distribution of inoculating agents in the steel matrix is...

Abstract Additively manufactured parts are characterized by a peculiar microstructure, originated the distinctive layer-by-layer process. In case of additive technology based on localized melting metallic feedstock, as laser-based powder bed fusion (LPBF), resulting microstructure has hierarchical arrangement, consisting macro- and microscopical features affecting final properties. Commonly, se...