In this study, N-methyl-N'propyltrimethoxysilylimidazoliummodified LUS-1 and MCM-48 nonoporous materials were prepared and employed as adsorbent for removing Reactive Blue-19 from aqueous solutions.LUS-1 and MCM-48 were made based on the previous procedure and modified with N-methyl-N'propyltrimethoxysilylimidazolium chloride. XRD analyses did not show any lattice alteration between modified an...

background: the efficacy of nh4cl-induced activated carbon (nac) was examined in order to adsorb rr198, an azo reactive model dye, from an aqueous solution. methods: the effects of ph (3 to 10), adsorbent dose (0.1 to 1.2 g/l), dye concentration and contact time on the adsorption efficiency were investigated. results: the results showed that the removal of dye was highest at a solution ph of 7 ...

Mechanism of Indigo carmine dye adsorption on palm wood cellulose activated carbon (PWCAC) was studied. The use of low cost ecofriendly adsorbent has been investigated as an ideal alternative to the current expensive methods of removing dye from aqueous solution. The study is done by batch adsorption techniques. The quantitative adsorption kinetic and equilibrium parameter for indigo carmine dy...

abstract background: at present study, acid modified banana leaf ash was used as an adsorbent for the successful removal of reactive black 5 (rb5) dye from aqueous environments. materials and methods: the effect of various operating parameters such as ph of solution, dye concentration, contact time, adsorbent dosage, and the temperature was investigated. results: maximum adsorption capacity of ...

Flax shive (FS) is a byproduct from flax fiber separation. The use of absorbent prepared from chitosan-modified flax shive (CFS) has been studied for removal of reactive red dye (RR228) from aqueous solutions. CFS was characterized by the Brunauer-Emmett-Teller (BET) method, Scanning Electron Microscopy (SEM), Fourier Transform Infrared spectrometry (FTIR), and X-ray photoelectron spectroscopy ...

Poly(HEMA) cryogel disks were synthesized by free radical polymerization of 2-hydroxyethylmethacrylate (HEMA), and then Cibacron Blue F3GA (CB), Reactive Green 19 (RG) and Congo Red (CR) were immobilized as dye ligands. Disks were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and swelling degree, porosity calculations. Cd2+ adsorption experi...

The microbial decolourization of Reactive Red 2 (RR2) dye has been studied under anaerobic conditions. Three semicontinuous bioreactors were operated with dye concentrations—R1 (control: 0 mg RR2 l−1), R2 (100 mg RR2 l−1) and R3 (200 mg RR2 l−1). The parameters monitored were, oxidation–reduction potential (ORP), methane production, colour and chemical oxygen demand (COD) removal during the fee...

methyl orange is one dye resulted from the textile industry. the aim of this study is to test theadsorption capacity of nickel oxide nanoparticles for removing the methyl orange from aqueoussolution. the parameters studied were the effect of temperature, contact time and initial ph ofsolution. results indicate that the removal efficiency of nickel oxide nanoparticles increases withincreasing co...

pollution of water resources by various pollutants is nowadays a global environmental issue. among the different type of water pollutants, dye represents a major polluting group. in this study, azolla filiculides roots have been used for adsorption of malachite green (mg), a cationic dyed from aqueous solution. in this study, effects of operating parameters such as initial concentration of dye ...