the control of the configuration of the nise nanostructural thin films with temperature

in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...

asymmetric polyethersulfone (pes) microfiltration flat sheet membranes were composed by the phase inversion method (pim) and were used as supports. composite membranes were fabricated by coating silicone rubber as selective layer. effect of different concentrations of pes and pdms and different solvent such as nmp, dmf and dms effects as pes solvents and support thickness and different coagulat...

run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...

126 abstract: in this research we studied the effects of cyclic hydration and dehydration of cysts of artemia urmiana and artemia parthenogenetica on the hatching percentage, survival and growth. the experiment was carried out in 3 treatments (1-3 hydration/dehydration cycles) with 3 replicates for each treatment. later effects of cold preservation at -20°c during three time periods were ...

a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...

abstract in the present research solution of chalcopyrite in sulfuric acid in hydrometallurgy method using electrochemistry with cyclic voltammetry technique has been investigated. the value of maximum reduction peak current of copper ions represents the measure of solubility. in this research different parameters temperature, potential, potential exert time, chalcopyrite concentration, sulfur...