the forging model for cold rolling is one of rolling models that is used in rolling calculations. in this model,the final rolling pressure is an average value and it is not an accurate model.also by using this model,the firction hill curves are plotted due to the central point of the rolling bite length while frictional stresses intersect at the neutral point.in this study, a new model based on...

Production of thin steel strips with 0.18-0.26 mm thickness is about 0.75 of annual production of the two stand reversing cold mill, while its efficiency is 60%. This is due to the fact that after montaging the grinded work rolls, rolling thin steel strips (with thicknesses less than 0.18 millimeters) is unavailable. Initially, unsuitable surface roughness, the friction between rolls and the st...

Production of thin steel strips with 0.18-0.26 mm thickness is about 0.75 of annual production of the two stand reversing cold mill, while its efficiency is 60%. This is due to the fact that after montaging the grinded work rolls, rolling thin steel strips (with thicknesses less than 0.18 millimeters) is unavailable. Initially, unsuitable surface roughness, the friction between rolls and the st...

production of thin steel strips with 0.18-0.26 mm thickness is about 0.75 of annual production of the two stand reversing cold mill, while its efficiency is 60%. this is due to the fact that after montaging the grinded work rolls, rolling thin steel strips (with thicknesses less than 0.18 millimeters) is unavailable. initially, unsuitable surface roughness, the friction between rolls and the st...

Cold rolling of steel is one of the most important metal forming processes so an accurate control of its parameters during the process is necessary. In this paper, the friction coefficient has been proposed as a function of cold rolling parameters such as forward slip, forward and backward tensile stresses ,strip thickness, static deformation, resistance of strip before and after rolling ,strip...

This paper presents a set-up optimization system developed to calculate reduction for each stand of a four stand tandem cold mill installed at Cosipa plant, Brazil. This optimization system is composed of an initialization phase and an optimization phase. The initialization phase consists of a non-iterative calculation procedure, proposed as an alternative for the iterative algorithm presented ...

Cold rolling of steel is one of the most important metal forming processes so an accurate control of its parameters during the process is necessary. In this paper, the friction coefficient has been proposed as a function of cold rolling parameters such as forward slip, forward and backward tensile stresses ,strip thickness, static deformation, resistance of strip before and after rolling ,strip...

trol loops to compensate backup roll eccentricity and harmonic hardness variation allows a significant improvement in strip thickness performance. These measures were successfully implemented as an extension to an exist ing two-stand aluminium cold rolling mill. An essential quality characteristic in the cold rolling sector is the minimum thickness deviation that can be achieved at final gauge,...

This paper presents a feedforward control concept for lateral asymmetries in heavyplate hot rolling. A lateral off-center plate position generally entails asymmetric rolling forces, asymmetric mill stretch, and thus a wedge-shaped exit thickness that may cause a cambered plate contour and a rotatory motion of the plate. In this paper, a model of the mill stand and of the plate movement is prese...

Cold rolling process is a complicated process which can be optimized by changing in variables and settings. This paper presents a set-up optimization system developed to calculate reductions and inter-stand tensions for each stand of a five stand tandem cold mill. The main objective in this optimization is minimization of power consumption. First, by using the analytical method, the equations ...