In this paper, a modified two-fluid model has been adopted to simulate the process of upward vertical subcooled flow boiling of refrigerant R-113 in a vertical annular channel at low pressure. The modified model considers temperature dependent properties and saturation temperature variation and was validated against a number of published low-pressure subcooled boiling experiments. The results s...

Heat transfer coefficient in nucleate pool boiling near critical heat flux at least one orderhigher than the convectional heat transfer modes. In this paper, an experimental setup isdesigned and fabricated to investigate the mechanism of heat transfer from boiling surface tobulk liquid near critical heat flux. The images of pool boiling near the high heat flux regionreveals that the individual ...

In this study, the behavior of nanoparticles using a numerical model is discussed. For this study a model for the expansion in free convection heat transfer and mix in a rectangular container with dimensions of 1 × 4 cm using Nano-aerosols in the air is going when copper nanoparticles, use and by changing the temperature difference between hot and cold wall, we will examine its impact on the ra...

the aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (nepcm) slurry as a cooling fluid instead of pure fluid. a threedimensional model of a circular channel using water slurry of nepcm was developed. the results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...

The aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (NEPCM) slurry as a cooling fluid instead of pure fluid. A threedimensional model of a circular channel using water slurry of NEPCM was developed. The results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...

In this paper, Turbulent mixed convective heat transfer of water and Al2O3 nanofluid has been numerically studied in a horizontal tube under non-uniform heat flux on the upper wall and insulation in the lower wall using mixture model. For the discretization of governing equations, the second-order upstream difference scheme and finite volume method were used. The coupling of pressure and veloci...

Effect of time dependent normal transpiration on the problem of unsteady viscous flow and heat transfer in the vicinity of an axisymmetric stagnation point of an infinite circular cylinder moving simultaneously with time-depended angular and axial velocities and with time-dependent wall temperature or wall heat flux are investigated. The impinging free stream is steady with a strain rate . A re...

in this paper, turbulent mixed convective heat transfer of water and al2o3 nanofluid has been numerically studied in a horizontal tube under non-uniform heat flux on the upper wall and insulation in the lower wall using mixture model. for the discretization of governing equations, the second-order upstream difference scheme and finite volume method were used. the coupling of pressure and veloci...

Transient phase change through a horizontal channel that subjected to discrete heat flux and filled with porous media of high-conductivity material, copper, is numerically investigated with n-pentane as the working fluid. The thermal non-equilibrium model is used in conjugate with the multiphase mixture model to analyze the transient behavior of fluid and solid phases. Three cases are studied r...

Transient phase change through a horizontal channel that subjected to discrete heat flux and filled with porous media of high-conductivity material, copper, is numerically investigated with n-pentane as the working fluid. The thermal non-equilibrium model is used in conjugate with the multiphase mixture model to analyze the transient behavior of fluid and solid phases. Three cases are studied r...