Investigating the Effect of Coagulation and Flocculation - Adsorption Process on Boron Removal from Industrial Wastewater (Case Study: Ceramic Tile Industry)

نویسندگان

  • Ebrahimi, A.A Environmental Science and Technology Research Center, Department of Environmental Health Engineering, Shahid Sadoughi University of Medical Sciences, Yazd, Iran
  • Ehrampoush, M.H. Environmental Science and Technology Research Center, Department of Environmental Health Engineering, Shahid Sadoughi University of Medical Sciences, Yazd, Iran
  • Eslami, H. Occupational Environment Research Center, Department of Environmental Health Engineering, School of Health, Rafsanjan University of Medical Sceiences, Rafsanjan, Iran
  • Zarei Mahmudabadi, T. Environmental Science and Technology Research Center, Department of Environmental Health Engineering, Shahid Sadoughi University of Medical Sciences, Yazd, Iran
چکیده مقاله:

Background and Objectives: Boron is widely found in raw materials and wastewater of the tile industry and its removal from aquatic environments is very complex. The aim of this study was to remove boron from wastewater of ceramic tile industry using coagulation and flocculation-adsorption process. Materials and Methods: This was an experimental study. Initially, for the coagulation process, pH parameters between 5 to 11, concentrations of 150 to 450 mg/L of poly-aluminum chloride (PAC) and concentrations of 0.5 to 2.5 mg/L of anionic and cationic polymers were examined. Then, in the adsorption process, the effect of pH between 2 to 7 at contact times of 5 to 20 min was investigated. Finally, the data were analyzed using Pearson’s correlation test. Results: The results showed that the percentage of boron removal by poly-aluminum chloride at the optimum pH equal 8 and the concentration of 400 mg/L was 35.7% and in combination with 1.5 and 2.5 mg/L anionic and cationic polymer, removal efficiency of 54.2 % (from 35 to 16 mg/L) was observed. Then, in the adsorption process with an optimum pH equal 5 and contact time of 15 minutes, removal efficiency of 50% (from 16 to 8 mg/L) was obtained. Examination of isotherms in the adsorption process showed that boron adsorption follows the Freundlich isotherm and first-degree kinetics. Conclusion: According to the results, the combined process of coagulation and flocculation with adsorption can be introduced as an effective process in boron removal. Key words: Coagulation, Flocculation, Adsorption, Boron, Industrial wastewater   Funding: This research was funded by Shahid Sadoughi University of Medical Sciences, Yazd. Conflict of interest: None declared Ethical approval: The study was approved by the Ethics Committee of Shahid Sadoughi University of Medical Sciences (IR.SSU.SPH.REC.1394.15). How to cite this article: Zarei Mahmudabadi T, Ebrahimi A A, Ehrampoush M H, Eslami H. Investigating the Effect of Coagulation and Flocculation-Adsorption Process on Boron Removal from Industrial Wastewater: (Case study: Ceramic Tile Industry). J Rafsanjan Univ Med Sci 2021; 19 (10): 1015-34. [Farsi]

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

the effect of traffic density on the accident externality from driving the case study of tehran

در این پژوهش به بررسی اثر افزایش ترافیک بر روی تعداد تصادفات پرداخته شده است. به این منظور 30 تقاطع در شهر تهران بطور تصادفی انتخاب گردید و تعداد تصادفات ماهیانه در این تقاطعات در طول سالهای 89-90 از سازمان کنترل ترافیک شهر تهران استخراج گردید و با استفاده از مدل داده های تابلویی و نرم افزار eviews مدل خطی و درجه دوم تخمین زده شد و در نهایت این نتیجه حاصل شد که تقاطعات پر ترافیک تر تعداد تصادفا...

15 صفحه اول

Optimization of Coagulation and Flocculation Process in Wastewater Treatment of the Food Industry: A Laboratory Study

Background and Objectives: Food industry wastewater has a high pollution load, which is due to water consumption at various stages. In the absence of adequate wastewater management and supervision of the food industry, this wastewater can be considered as a source of environmental pollution. This study aimed to optimize the coagulation and flocculation process for the treatment of food industry...

متن کامل

Removal of surfactant from industrial wastewaters by coagulation flocculation process

Surfactants are among the most widely disseminated xenobiotics that contribute significantly to the pollution profile of sewage and wastewaters of all kinds. Among the currently employed chemical unit processes in the treatment of wastewaters, coagulation-flocculation has received considerable attention for yielding high pollutant removal efficiency. Jar-test experiments are employed in order t...

متن کامل

Investigating the efficiency of chemical coagulation/Electro-Fenton process in the removal of organic matter from pharmaceutical industry wastewater

Background and Objective: Wastewater from pharmaceutical industry has high chemical oxygen demand as a result of the presence of organic drugs and antibiotics. In order to meet the environmental requirements, several treatment methods like chemical and electrochemical methods have been widely applied due to their high ability to remove organic compounds from pharmaceutical wastewater. Therefore...

متن کامل

the effect of consciousness raising (c-r) on the reduction of translational errors: a case study

در دوره های آموزش ترجمه استادان بیشتر سعی دارند دانشجویان را با انواع متون آشنا سازند، درحالی که کمتر به خطاهای مکرر آنان در متن ترجمه شده می پردازند. اهمیت تحقیق حاضر مبنی بر ارتکاب مکرر خطاهای ترجمانی حتی بعد از گذراندن دوره های تخصصی ترجمه از سوی دانشجویان است. هدف از آن تاکید بر خطاهای رایج میان دانشجویان مترجمی و کاهش این خطاها با افزایش آگاهی و هوشیاری دانشجویان از بروز آنها است.از آنجا ک...

15 صفحه اول

a study on the design of bio-ethanol process from date wastes of sistan and baluchistan province

اتانول کاربردهای متنوعی در صنایع لاستیک سازی، رنگسازی، حلالها ومکمل سوخت خودرو دارد. اتانول برخلاف نفت از جمله مواد تجدیدپذیر محسوب می شود که مشکلات زیست محیطی و آلودگی نیز ایجاد نمی کند. استفاده از اتانول به عنوان مکمل سوختخودروها از جمله مهمترین مصارف صنعتی این ماده بشمار می رود. با توجه به این موضوع تحقیق و توسعه در زمینه تولید اتانول با درجه خلوص بالا در سطح جهان، و نه تنها در کشور های پیشر...

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 19  شماره 10

صفحات  1015- 1034

تاریخ انتشار 2021-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

کلمات کلیدی برای این مقاله ارائه نشده است

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023