× خانه ژورنال ها پست ها ثبت نام ورود

K. Zangeneh-madar

Department of Materials Engineering, MUT

[ 1 ] - THE FEASIBILITY STUDY OF W-Cu COMPOSITE PRODUCTION BY SUBMICRON PARTICLES ADDITION AND INFILTRATION

In this paper the feasibility of fabricating controlled porous skeleton of pure tungsten at low temperature by addition of submicron particles to tungsten powder (surface activated sintering) has been studied and the best parameters for subsequent infiltration of Cu were acquired. The effects of addition of submicron particles and sintering temperature on porous as well as infiltrated samples w...

[ 2 ] - THE EFFECT OF COBALT ADDITIVE ON MICROSTRUCTURE AND PROPERTIES OF W-CU COMPOSITES PREPARED BY SINTERING AND INFILTRATION PROCESSES

In the present paper, the influence of cobalt additive on the sintering/infiltration behavior of W-Cu composite was studied. For this purpose, the mixed powders of tungsten and cobalt were compacted by CIP method and then sintered at 1450, 1550 and 1600 °C in a hydrogen atmosphere. The sintered specimens at 1550 °C were subsequently infiltrated with liquid copper at 1250 °C for 10, 60 and 1...

[ 3 ] - بررسی اثر شرایط پیش‌عملیات الکتروپولیش بر کیفیت سطحی و رنگ ورقه آلومینیمی

در این تحقیق، تأثیر عملیات الکتروپولیش بر زبری، درخشش ورقه آلومینیم و همچنین کیفیت رنگ آبی پس از رنگ‌کاری روی فیلم آندایز شده مورد مطالعه قرار گرفت. برای این منظور، تأثیر غلظت محلول (اسید پرکلریک و الکل اتیلیک با نسبت حجمی 1:5، 1:6 و 1:7)، ولتاژ (5 الی 25 ولت) و زمان عملیات الکتروپولیش (2 الی 9 دقیقه) مطالعه گردید. از میکروسکوپ نیروی اتمی (AFM) و نرم‌افزار فتوشاپ برای بررسی پوشش سطحی استفاده شد...

[ 4 ] - The Effect of Platinum Layer and Aluminizing Process on Surface Roughness of Coated Superalloy by Pt-Al

In this study, the effect of platinum-aluminide coating parameters on surface roughness of nickel-based superalloy Rene®80 was evaluated. For this purpose, different thicknesses of Pt-layer (2, 4, 6 and 8µm) were plated on the Samples. Then diffusion aluminide coating in two types, high tempeature-low activity and low temperature-high activity was performed. The results of structural investigat...

[ 5 ] - Nickel Base Superalloy Rene®80 – The Effect of High Temperature Cyclic Oxidation on Platinum-Aluminide Coating Features

Nickel base superalloy alloys are used in the manufacture of gas turbine engine components, which in use are exposed to high temperatures and corrosive environments. The platinum aluminide coatings described here have been developed to protect nickel base superalloy alloys from oxidation. In this study, the effect of cyclic oxidation, platinum layer thickness and aluminizing process on beha...