ایرج احمدی

بهشهر - دانشگاه علم و فناوری مازندران - دانشکده مهندسی برق و کامپیوتر

[ 1 ] - مدل‌سازی تأثیر حضور ترانسفورماتور یدکی بر قابلیت اطمینان مجموعه‌ای از پست‌های فوق‌توزیع

با به‌وجود آمدن صنایع بسیار حساس و افزایش میزان سرمایه‌گذاری‌ها در این صنایع، ارزش اقتصادی برق روزبه‌روز بیش‌تر شده و درنتیجه زیان‌های واردآمده بر مصرف‌کنندگان ناشی از قطعی‌های موقت یا دائم انرژی الکتریکی افزایش چشم‌گیری یافته است. یکی از دلایل قطعی انرژی الکتریکی وقوع خطا در ترانسفورماتورهای قدرت است. استفاده از ترانسفورماتورهای یدکی، یکی از پرکاربردترین روش‌ها در بهبود قابلیت‌اطمینان انرژی تح...

[ 2 ] - مدلسازی اثر بارگذاری بر قابلیت اطمینان ترانسفورمر

Transformer is one of the most important components of power system, which determining its reliability is very important. To evaluate transformer overall reliability, in addition to probability of failures occur due to chance events, the probability of failures owing to aging should be taken into account. To determine transformer reliability in aging area, estimating its remaining life is of gr...

[ 3 ] - Optimal Distributed Generation Planning in Radial Distribution Networks Considering Protection Coordination Limits

Distributed generation (DG) has been widely used in distribution network to reduce the energy losses, improve voltage profile and system reliability, etc.  The location and capacity of DG units can influence on probability of protection mal-operation in distribution networks. In this paper, a novel model for DG planning is proposed to find the optimum DG location and sizing in radial distr...

[ 4 ] - Reliability Assessment of Distribution Transformers Considering Load Harmonics

The progressive application of non-linear loads in distribution systems (DS) increases current harmonics flow in DS's apparatuses, especially distribution transformers (DTs). Since DTs' operating temperature rises due to the harmonics flow, their loading should be reduced such that the hot spot temperature (HST) is preserved under its permissible value. This means that DTs' available capacity i...