One of the key design parameters to a process plant with large capacity is the risk of AIV (Acoustically Induced Vibration) on the flare piping system. AIV is a piping vibration phenomenon exhibiting high frequencies caused by large acoustic power generated by the pressure drop across a PRV (Pressure Relief Valve). The evaluation method for susceptibility of piping to AIV fatigue failure was fi...

Pressure vessel is a container used to store fluids under pressure and temperature. The fluids can be air, water, chemicals, fuel, gases etc. are most commonly used in food and chemical industries, oil refineries and so on. Pressure vessel is subjected to thermal and structural loads for power plant applications. Since the pressure vessel are subjected to both structural and thermal loads stres...

In this paper, low cycle fatigue life of CK45 steel and SS316 stainless steel under strain-controlled loading are experimentally investigated. In addition, the impact of mean strain and strain amplitude on the fatigue life and cyclic behavior of the materials are studied. Furthermore, it is attempted to predict fatigue life using energy and SWT damage parameters. The experimental results demons...

In this paper, the effect of interference fit on fatigue life of holed plate of mechanical joints was investigated experimentally. Fatigue tests were carried out on the holed specimens of Al-alloy 7075-T6 alloy. The interference fit process consists of force fitting a fastener into the hole with a negative clearance (diameter of the fastener is larger than of the hole) that produces beneficial ...

this paper presents the fatigue life behavior of hub using random vibration based on road roughness. the main objectives of this study are to predict the fatigue life and to identify the critical location for evaluating fatigue damage. asphalt road surface profiles obtained in favorable circumstances by topography cameras and in according road classification iso 2631-1estimate road roughness su...

this paper presents the effects of different amounts of reclaimed asphalt on fatigue life of asphalt mixtures. central composite method was used to design of experiments based on response surface method (rsm). binder type (pen 60/70 and pen 85/100), reclaimed asphalt pavement (rap) content (25, 50 and 75%) and loading strain (150, 250 and 350 micro strain) were selected as independent variables...

In this study, the effect of repair on fatigue life of tubular joints is investigated. Six cracked specimens precedently subjected to fatigue loading undergone to weld repair. Two of those specimens were shot peened before primary fatigue loading.  It is shown that repair gives rise to about 150% increase in fatigue life for original specimens while the increase of fatigue life for shot-peened ...