abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...

gol-e-gohar iron ore mine of sirjan in southern part of iran is a large open pit that operates below the groundwater table and during mining operation, dewatering is required to prevent operation processes from flooding. current operation is going on by digging wells in or out of the pit and pumping to prevent flooding. as a result of the former dewatering operation a vast deep cone of depressi...

in this thesis protic and aprotic ammonium-based ionic liquids were synthesized and their surface tensions were measured in the range of 298-373k. the protics are alkyl ammonium-based ils with the carboxylate (formate, acetate, propionate) anion and aprotics are quaternary ammonium-based ils with bis(trifluoromethylsulfonyl)imide anion. capillary rise method was used for surface tension measure...

the caspian sea contains great resources of oil and gas. the caspian sea is a 700- mile- long body of water in central asia, land located between azerbaijan, iran, kazakhstan, russia and turkmenistan. iran was challenges and opportunities in the caspian region. key question in this thesis includes three section that first question, opportunities of iran in the caspian region, second question ch...

abstract sensitive and precise voltammetric methods for the determination of trace amounts of furaldehydes, mainly as furfural (f) and 5-hydroxymethyl-2-furaldehyde (hmf), in waste waters and other matrices is described. determination of total furaldehyde at < ?g g-1 levels in alkaline buffered aqueous media was individually investigated. by the use of ordinary swv and adsorptive square wave ...

cement is an essential ingredient in the concrete buildings. for production of cement considerable amount of fossil fuel and electrical energy is consumed. on the other hand for generating one tone of portland cement, nearly one ton of carbon dioxide is released. it shows that 7 percent of the total released carbon dioxide in the world relates to the cement industry. considering ecological issu...