abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

drought is transient phenomenon , slow , repetitive and integral part of the climate of each region. drought begins with a substantial reduction in precipitation over the long-term average rainfall and over time, reduced soil moisture and surface and ground water resources will continue to decrease. this phenomenon is the most important in bakhtegan basin because of its importance in strategic ...

the aim of this paper is eliminating cr(vi) by natural hap. hap is a inexpensive material which is used from bovine critical bone ash in order to remove heavy metal ions like cr(vi). some experiments in different ph are performed (ph=2,3,7). maximum adsorption was appeared at ph=2, dosage=0.3 gr, c0=10 mg/l. cr(vi) removal depends on ph value and initial amount of cr(vi) result of experiments w...

a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...

in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...

in this thesis, a better reaction conditions for the synthesis of spirobarbiturates catalyzed by task-specific ionic liquid (2-hydroxy-n-(2-hydroxyethyl)-n,n-dimethylethanaminium formate), calcium hypochlorite ca(ocl)2 or n-bromosuccinimide (nbs) in the presence of water at room temperature by ultrasonic technique is provided. the design and synthesis of spirocycles is a challenging task becaus...

in this thesis, barium ferrite nano particles were prepared by sol-gel method. their structural and magnetic properties of samples have been investigated using thermo gravimetric analysis (tg-dta), x-ray powder diffractometer (xrd), fourier transform infrared (ftir), scanning electron microscopy (sem), field emission scanning electron microscopy (fesem), ac susceptometer, vibrating sample magne...

asymmetric polyethersulfone (pes) microfiltration flat sheet membranes were composed by the phase inversion method (pim) and were used as supports. composite membranes were fabricated by coating silicone rubber as selective layer. effect of different concentrations of pes and pdms and different solvent such as nmp, dmf and dms effects as pes solvents and support thickness and different coagulat...

introduction acetic acid bacteria are large group of obligate aerobic gram negative bacteria with the ability to oxidize ethanol to acetic acid (1). they are widely distributed in natural habitats and classified in family acetobacteraceae. members of this family are useful in industrial production of vinegar(2). acetic acid bacteria (aab) can use substrates as glucose, ethanol, lactate or glyc...