To control the quality of reverse osmosis (RO) product water and reduce operational costs and environmental impacts by increasing the system’s energy efficiency, it is necessary to identify the influence of process parameters on energy consumption and permeate water quality. This paper introduces a case study focused on the application of Design of Experiments (DOE) method in an industrial-scal...

Background and Objectives: One of the problems in juice membrane clarification is the accumulation and deposition of rejected compounds on membrane surfaces or inside its pores which results in a membrane fouling. Materials and Methods: Several parameters can have influence on fouling in one hand and prediction of juice permeates flux during the membrane processing is of importance in indust...

Molasses, the main material of this project was diluted and processed, according to the type of the used ultra and nano membranes (UF10kDa, UF5kDa, N30F). Permeate flux was determined at different times for membranes and steady time was registered. By changing transmembrane pressure, permeate flux, which is dependent on the pressure, was registered. Final permeate flux was registered in each tr...

Fouling behaviour and its impact on the rejection of trace organic contaminants (TrOCs) by forward osmosis (FO) were investigated.Membrane fouling was simulated using humic acid and colloidal particles asmodel foulants at different initial permeatewater fluxes.Water flux declinewas insignificant at an initial permeate flux of 9 L/m2h and the fouling layerwas loose and fluid-like. By contrast, t...

In this paper, removal of chromium(VI) from aqueous solution has been researched using reverse osmosis. The influence of transmembrane pressure and feed concentration on permeate flux, water recovery, permeate concentration, and salt rejection was studied. The results showed that according to the variation of transmembrane pressure and feed concentration, the permeate flux and salt rejection we...

A mass transfer model is proposed for prediction of permeate concentration and percent rejection at different inlet pressures and feed dye concentrations in membrane ultrafiltration. A differential equation in cylindrical co-ordinates considering the spiral wound membrane equivalent to a cylindrical module is derived which coupled with mass balance and permeate flux equations are solved to yiel...

Background and Objectives: Pomegranate juice (PJ) contains large particles that stick to evaporator walls causing off flavors in the concentrate due to burning. Microfiltration is used to clarify PJ. Fouling is a limiting phenomenon that can prevent the industrialization of membrane clarification. Changes in the geometry of the membrane module such as using baffles are useful to decrease this p...

in the present study, the growth of phospholipids' micelles in canola oil by chemical pretreatment and their separation by using membrane technology was investigated. aqueous solutions of calcium chloride (1% w/w) and edta (150 mm) were added to canola oil miscella before ultrafiltration process. ultrafiltration was conducted by a flat sheet pvdf membrane with two different mwcos (50 kda, m116,...