Welding method and its parameters has an important effect on the formability and mechanical properties of tailor welded blanks(TWBs). In this study gas tungsten arc welding(GTAW) is used to joint aluminum TWBs. Aluminum TWBs consist of 6061 aluminum sheets with different thickness of 1mm and 2mm. Main parameters of GTAW consist of welding current, pressure of shielding gas, welding speed and di...

The demands for properties of deep-drawing materials are continuously growing, while new processing technologies and testing procedures to assess the deep-drawing properties are looked for. The formability of materials is influenced by all factors participating in the forming process, namely the sheet material, the product type, the tool and the production technology of a pressing. Indicative i...

The paper demonstrates the correlation between the chemical composition of steel grades and the hardness as well as the formability of laser welds generated with modern automotive high strength steel grades. At the very low heat input of industrial laser welding and the resulting extremely high cooling rate, the weld hardness is fully controlled by the carbon content of the base materials and n...

in this research formability behavior and texture of st14 low carbon steels produced by foolad mobarakeh plant for deep drawing application had been studied. plate textures were characterized by x-ray diffraction technique. to evaluate formability behavior one dimensional tensile test was carried out and related parameters were recognized. moreover eriksson experiment and spherical pattern prin...

Various solution-treatments were applied on a rapidly solidified and subsequently rolled Mg-7.50Al-1.07Ca-0.17Mn (mass%) alloy sheet, room-temperature stretch formability, tensile properties, microstructures, textures of the solution-treated sheets have been investigated. Although solution-treatment at 400 °C gives high strengths, sheet shows poor formability with Index Erichsen value 4.8 mm du...

High-temperature pre-stretching experiments were carried out on the AZ31 Mg alloy at 723 K with strain levels of 2.54%, 6.48%, 10.92%, and 19.2% to alter microstructure texture for improving room-temperature formability. The results showed that strain-hardening coefficient increased, while Lankford value decreased. In addition, Erichsen values all pre-stretch sheets enhanced compared as-receive...