a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...

a one dimensional dynamic model for a riser reactor in a fluidized bed catalytic cracking unit (fccu) for gasoil feed has been developed in two distinct conditions, one for industrial fccu and another for fccu using various frequencies of microwave energy spaced at the height of the riser reactor (fccu-mw). in addition, in order to increase the accuracy of component and bulk diffusion, instanta...

the aim of this thesis is an approach for assessing insurer’s solvency for iranian insurance companies. we use of economic data with both time series and cross-sectional variation, thus by using the panel data model will survey the insurer solvency.

rivers and runoff have always been of interest to human beings. in order to make use of the proper water resources, human societies, industrial and agricultural centers, etc. have usually been established near rivers. as the time goes on, these societies developed, and therefore water resources were extracted more and more. consequently, conditions of water quality of the rivers experienced rap...

flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...

‏‎the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...

this study considers the level of increase in customer satisfaction by supplying the variant customer requirements with respect to organizational restrictions. in this regard, anp, qfd and bgp techniques are used in a fuzzy set and a model is proposed in order to help the organization optimize the multi-objective decision-making process. the prioritization of technical attributes is the result ...

run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...

abstract biometric access control is an automatic system that intelligently provides the access of special actions to predefined individuals. it may use one or more unique features of humans, like fingerprint, iris, gesture, 2d and 3d face images. 2d face image is one of the important features with useful and reliable information for recognition of individuals and systems based on this ...

in this thesis a calibration transfer method is used to achieve bilinearity for augmented first order kinetic data. first, the proposed method is investigated using simulated data and next the concept is applied to experimental data. the experimental data consists of spectroscopic monitoring of the first order degradation reaction of carbaryl. this component is used for control of pests in frui...